Recycling of End-of-Life AlNiCo-5 into Polyamide 12-Bonded Magnets by Material Extrusion (MEX) Additive Manufacturing: Effects of Filler Loading on Printability and Properties

This work explores a sustainable route for producing recycled AlNiCo-based magnetic composites by incorporating end-of-life AlNiCo-5 particles into a polyamide 12 (PA12) matrix, thereby eliminating conventional debinding requirements. The study emphasizes material circularity through the reuse of mechanically recovered magnetic waste and polymeric residues. Virgin PA12 powder was used as the matrix material for high magnetic filler loadings of 40, 60, and 70 wt.% AlNiCo-5, while stearic acid was introduced to enhance interfacial compatibility and overall processability. The resulting composites were shaped into filaments and processed via material extrusion additive manufacturing, demonstrating that commercially available fused filament fabrication systems can successfully handle highly filled metal-polymer blends when supported by appropriate formulation and process parameter optimization. The findings confirm the feasibility of manufacturing flexible, functional, and resource-efficient magnetic components using widely accessible equipment, highlighting a promising pathway toward the cost-effective recycling and reuse of AlNiCo magnetic materials.