Observations of Atmospheric Temperature in the Mesopause Region Using a Na Doppler Lidar and Comparison with SABER Satellite Data over Qingdao, China

Accurate measurement of atmospheric temperature profiles in the mesopause region is crucial for understanding the atmospheric dynamics and climate processes. To address this challenge, a sodium Doppler lidar based on the resonance fluorescence scattering mechanism was recently developed to precisely detect atmospheric temperatures in the mesopause region in Qingdao (36.1°N, 120.1°E), China. For the first time, high-resolution observations of atmospheric temperature in the mesopause region (80–105 km) were achieved by the self-developed Na Doppler lidar in Qingdao under the complex atmospheric conditions of the mid-latitude coastal zone. A systematic cross-validation between the self-developed lidar and SABER satellite observations was conducted, and the temperature bias between the two detection methods in the mesopause region and its altitude-dependent characteristics were quantitatively assessed. The temperature profiles measured by lidar exhibited good agreement when compared with the satellite data yielding estimations of RMSE and mean absolute deviation of 9.2 K and 7.3 K, respectively, from 80 km to 100 km altitudes. A correlation analysis conducted between the lidar temperature data and satellite data showed that the closer the satellite passed over Qingdao, the better the correlation demonstrated by the data. The correlation coefficient of the closer comparison data can reach 0.86, which means that the self-developed lidar system in Qingdao has a good ability to detect temperature profiles in the middle and upper atmosphere. The nocturnal evolution details and short-period fluctuations of the temperature field in the mesopause region over Qingdao were observed, revealing the local temperature structural characteristics under the complex atmospheric conditions at the land–sea interface in the Qingdao area.