Development of an Electrochemical System for Cleaning Oil Refinery Waste from Sulfides and Organic Pollutants

Sulfide-alkaline wastewater (SAW) from petrochemical plants, particularly from pyrolysis and hydrotreating units, presents a significant environmental challenge due to its high toxicity, extreme alkalinity (pH > 12), and high concentrations of sulfides and organic pollutants. Traditional treatment methods like acid neutralization or air oxidation are often inefficient, generate secondary waste, or fail to recover valuable components. This study investigates the effectiveness of a novel electrochemical system for the simultaneous treatment of SAW and recovery of valuable products. A lab-scale four-chamber electrodialyzer, equipped with cation-exchange membranes and nickel bipolar electrodes, was designed and tested using real industrial wastewater. The wastewater was characterized by a pH of 13.06, chemical oxygen demand of 12,600 mg/L, and a sulfide content of approximately 5000 mg/L. The process leverages anodic oxidation to convert sulfide ions into elemental sulfur, while sodium cations migrate through cation-exchange membranes to the cathodic compartments. There, water reduction generates high-purity hydrogen (≥99.9%) and a concentrated, purified sodium hydroxide solution. The results demonstrate the ineffectiveness of electrodialysis with anion-exchange membranes due to rapid membrane degradation. In contrast, the proposed electrodialyzer with bipolar electrodes achieved excellent performance: a caustic soda solution with a concentration of 2.3–2.5% was recovered with a current efficiency of 83–85%, containing only trace amounts of sulfides (0.0052%) and organic impurities (0.053%). The process completely removed the original sulfide alkalinity. The study confirms the chemical and mechanical stability of the cation-exchange membranes under harsh SAW conditions. The proposed technology offers a path towards a closed-loop system in refineries by enabling the reuse of recovered caustic, utilization of hydrogen, and potential recovery of sulfur, aligning with the principles of green chemistry and circular economy.