High-Performance Iontronic Pressure Sensor with a Multi-Level Conoid-like Structure Fabricated via Direct Laser Writing

Sensitivity and effective sensing range are core performance metrics of flexible pressure sensors, directly dictating their practical applicability. A key challenge in sensor design is sensitivity degradation with elevated pressure, hindering synergistic optimization of high sensitivity and broad sensing range, while cumbersome electrode fabrication further impedes facile preparation and large-scale deployment of high-performance devices. Herein, this work proposes a novel fabrication strategy for flexible iontronic pressure sensors via direct laser writing (DLW) technology. A controllable ultraviolet laser patterns polyimide substrates to fabricate hierarchical stepped conoid-like microstructural templates, which are transferred to ion gels through reverse molding. The DLW-enabled precise geometric control and hierarchical conical architectures efficiently amplify interfacial contact area variation under pressure, significantly boosting sensitivity. The resultant sensor achieves a high sensitivity of 118.4 kPa−1 and a broad detection range up to 2000 kPa, with fast response/recovery times of 38.4 ms and 47 ms and excellent mechanical stability enduring 2000 loading–unloading cycles at 850 kPa. Multi-scenario physiological signal monitoring validates its accurate capture of laryngeal vibrations and joint movements. This work establishes a straightforward, efficient microfabrication route for high-performance flexible iontronic sensors, accelerating their practical application in wearable health monitoring and related fields.