Experimental study of turbulent flow through a ribbed square duct

Planar particle image velocimetry (PIV) measurements were conducted to investigate turbulent flows through a square duct roughened by transverse rectangular ribs of four blockage ratios ( ${\textit{Br}}=0.1$ , 0.15, 0.2 and 0.25) at a bulk Reynolds number of ${\textit{Re}}_b = 9400$ . In contrast to the classical two-dimensional (2-D) rib-roughened boundary-layer flows, the turbulent flow studied here is intrinsically three-dimensional (3-D) and inhomogeneous, complicated by not only the internal shear layers (ISLs) triggered by the rib crests, but also the intense interaction of the four boundary layers developing over duct sidewalls. It is observed that turbulent motions near the rib crest are mainly dominated by the ejection and sweep events. As the blockage ratio increases, the magnitudes of Reynolds stresses near the rib crest increase significantly attributed to enhanced sweep events and large-scale flapping motions. The results of temporal auto-correlations and spatial two-point auto-correlations show that both temporal and spatial integral scales of turbulence structures are dominated by the streamwise velocity fluctuations, which increase as the rib height increases. Based on proper orthogonal decomposition (POD) analyses, it is interesting to observe that the ISL near the rib crest is dominated by both the low- and high-frequency flapping motions characteristic of the first POD mode.