Reassessing surface liberation for flotation: The dimensional contrast between 3D XCT and 2D SEM-based MLA

Mineral liberation for flotation is inherently a three-dimensional (3D) surface property, yet it is conventionally quantified using sectional measurements from SEM (X-ray back-scattering, inherently 2D) based Mineral Liberation Analysis (MLA). This dimensional mismatch has rarely been critically examined. Here, we explicitly contrast the volumetric resolving capability of X-ray computed tomography (XCT) with the intrinsic 2D nature of SEM backscattered imaging to reassess liberation in flotation of coarse and composite sulphides. A bornite-rich ore was separated into two coarse fractions (–300+212 µm and –212+150 µm) and floated in a Hallimond tube. Feed and products were characterised by both MLA and XCT. While MLA quantified 2D areal sulphide fractions from polished sections, XCT reconstructed full particle volumes and directly measured exposed sulphide surface area, which is the physically relevant attribute controlling bubble–particle attachment. MLA systematically overestimated high-grade classes due to stereological bias, misclassifying composite particles with limited external exposure as liberated. In contrast, XCT revealed a threshold-controlled flotation response: particles with <25% exposed sulphide contributed negligibly to recovery, whereas those >65% behaved as effectively liberated. Flotation rate constants correlated strongly with 3D surface exposure but were dispersed when expressed as 2D sectional grades. These results demonstrate that liberation is fundamentally a 3D surface accessibility problem and that XCT-derived surface exposure provides a physically consistent descriptor of coarse composite particle flotation, exposing the inherent dimensional limitation of traditional 2D MLA metrics.

Authors

Publication Details

Journal
Minerals Engineering
Published
2026-11-16
DOI
https://doi.org/10.1016/j.mineng.2026.111065
Primary Topic
Minerals Flotation and Separation Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Reassessing surface liberation for flotation: The dimensional contrast between 3D XCT and 2D SEM-based MLA

Tuan A.H. Nguyen, Duc Quang Dao, Ngoc N. Nguyen, Anh V. Nguyen
Minerals Engineering
Minerals Flotation and Separation Techniques
article

Reassessing surface liberation for flotation: The dimensional contrast between 3D XCT and 2D SEM-based MLA

Tuan A.H. Nguyen, Duc Quang Dao, Ngoc N. Nguyen, Anh V. Nguyen
article en

Abstract

Mineral liberation for flotation is inherently a three-dimensional (3D) surface property, yet it is conventionally quantified using sectional measurements from SEM (X-ray back-scattering, inherently 2D) based Mineral Liberation Analysis (MLA). This dimensional mismatch has rarely been critically examined. Here, we explicitly contrast the volumetric resolving capability of X-ray computed tomography (XCT) with the intrinsic 2D nature of SEM backscattered imaging to reassess liberation in flotation of coarse and composite sulphides. A bornite-rich ore was separated into two coarse fractions (–300+212 µm and –212+150 µm) and floated in a Hallimond tube. Feed and products were characterised by both MLA and XCT. While MLA quantified 2D areal sulphide fractions from polished sections, XCT reconstructed full particle volumes and directly measured exposed sulphide surface area, which is the physically relevant attribute controlling bubble–particle attachment. MLA systematically overestimated high-grade classes due to stereological bias, misclassifying composite particles with limited external exposure as liberated. In contrast, XCT revealed a threshold-controlled flotation response: particles with <25% exposed sulphide contributed negligibly to recovery, whereas those >65% behaved as effectively liberated. Flotation rate constants correlated strongly with 3D surface exposure but were dispersed when expressed as 2D sectional grades. These results demonstrate that liberation is fundamentally a 3D surface accessibility problem and that XCT-derived surface exposure provides a physically consistent descriptor of coarse composite particle flotation, exposing the inherent dimensional limitation of traditional 2D MLA metrics.

Minerals EngineeringVol. 251
Minerals Flotation and Separation Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon