Calibrating the Unit Cell Method for Jet-Grout Column Groups: A Field-Derived Mobilization Factor Approach

Predicting the settlement behavior of jet-grout column groups in reclaimed coastal areas remains a significant geotechnical challenge, as conventional models do not capture the complex interaction between isolated stiff columns and the compliance of the composite system under wide-area loading. This study presents a field-calibrated analytical approach that reconciles single-column mechanics with full-scale group performance at a port terminal founded on highly compressible, liquefaction-prone marine backfill improved by 800 mm jet-grout columns. An extensive field-testing program—including cone penetration tests (CPTs), single-column load tests (SCLTs), and surface loading tests (SLTs)—was conducted. SCLT results revealed an elastic modulus exceeding 10 GPa, and CPT data confirmed up to a 250% increase in inter-column soil tip resistance. However, SLTs under an 85 kPa operational load yielded a back-calculated system stiffness of approximately 105 MPa, which is drastically lower than the theoretical unit cell prediction of 933 MPa. This empirical relation demonstrates that unit cell models fundamentally overestimate jet-grout group stiffness. Rather than proposing a site-specific static mobilization factor (β ≈ 0.11), this study introduces a novel, adaptive methodology. By systematically integrating single-column rigidity, group interaction, and stress transfer mechanics into untreated soil, this framework establishes a robust paradigm for accurately predicting composite stiffness and settlements across diverse geotechnical conditions.