Digital Core-Based Characterization and Fracability Evaluation of Deep Shale Gas Reservoirs in the Weiyuan Area, Sichuan Basin, China

Deep shale gas reservoirs in the southern Sichuan Basin (Weiyuan area) exhibit strong heterogeneity and complex pore-fracture networks. Traditional reservoir evaluation methods struggle to accurately capture their microscale pore characteristics and fracability, thereby restricting efficient development and precise sweet spot prediction. Therefore, integrating digital core technology with geological analysis is essential to systematically quantify key reservoir parameters, including microscale pore structure, mineral composition, and brittleness characteristics. To clarify the controlling factors of high-quality deep shale gas reservoirs in the Weiyuan area and assess their exploration and development potential, we performed digital core analysis at micron to nanometer scales. Three-dimensional digital core models of representative deep shale gas wells were constructed. Integrating mineral composition, geochemical characteristics, and pore space features, we discuss the geological conditions for deep shale gas accumulation and the fracability of horizontal wells, and we delineate favorable shale reservoir zones. The results show that digital core technology enables quantitative and visual characterization of each sublayer of the Longmaxi Formation shale reservoir, including mineral types, laminae types, pore-throat structures, and organic matter distribution. From the Long 11-1 sublayer to the Long 11-4 sublayer, the pore-throat radius, total pore volume, total throat volume, connected pore-throat percentage, and coordination number all gradually decrease. In the eastern Weiyuan area, the siliceous components in deep shale gas reservoirs at the base of the Longmaxi Formation are primarily of both biogenic and terrigenous origin. Due to local variations in the sedimentary environment, terrigenous input contributes significantly to the total siliceous content in this region. Although the Long 11-1 sublayer of the Longmaxi Formation is lithologically classified as mud shale, its particle size and mineral composition more closely resemble those of clayey siltstone or argillaceous sandstone, suggesting considerable potential for reservoir space development. Typical wells in the eastern Weiyuan area exhibit distinct lithological characteristics, including coarser grain sizes, stronger hydrodynamic conditions during deposition, and abundant terrigenous clastic supply. The rigid framework formed by silt- to sand-sized particles effectively mitigates compaction, thereby facilitating the preservation of intergranular pores and microfractures. High organic matter abundance, appropriate thermal maturity, and a considerable thickness of high-quality shale ensured sufficient hydrocarbon supply. The main types of natural fractures are intergranular and grain-edge fractures formed by differences in sedimentary grain size, and bedding-parallel fractures generated by hydrocarbon generation overpressure. Based on reservoir mineral composition, pore characteristics, areal porosity, and pore size distribution identified via digital core analysis, the bottom 0–3 m of the Long 11-1 sublayer is determined to be the optimal target interval. By delineating the microscopic characteristics of the shale reservoir and predicting rock mechanical parameters, a fracability evaluation index was established from digital core simulations. This guides the selection of target layers in deep shale gas reservoirs and optimizes hydraulic fracturing design.