A Novel Fiber-Optic Fabry–Perot Absolute Pressure Sensor Based on Frequency Modulated Continuous Wave Interferometry

Accurate absolute pressure measurement is of great importance in industrial control, environmental monitoring, and aerospace. Traditional fiber-optic Fabry–Perot (F-P) pressure sensors usually involve complex microfabrication and high-cost demodulation systems, while conventional diaphragm capsule sensors are limited in sensitivity and resolution. This work presents a low-cost, high-resolution fiber-optic F-P absolute pressure sensor. The sensor uses a vacuum capsule as one reflective surface and a partially reflective fiber collimator as the other, forming a low-finesse F-P interferometer. The cavity length is linearly modulated by the elastic deformation of the capsule under pressure, and high-precision demodulation is realized using frequency modulated continuous wave (FMCW) interferometry instead of conventional spectral methods. Static experiments from 10 to 110 kPa show that the sensor exhibits a high sensitivity of 15,105 nm/kPa and a resolution of 3.3 Pa. Furthermore, the sensor operates normally within the range of −20 °C to 70 °C, exhibiting a pressure–temperature cross-sensitivity of 0.081 kPa/°C and a cavity length drift of 496 nm/h. With the advantages of high performance, simple structure, low cost, and good scalability by selecting different capsules, the proposed sensor has promising potential for practical applications in pressure measurement fields.