Surface Topography and Tolerance Quality Evaluation of Polymer Gears Using Non-Contact 3D Scanning Method

The shift toward lightweight powertrain architectures necessitates a detailed characterization of polymer gears to verify their efficiency and durability. This study investigated the effectiveness of non-contact structured-light 3D scanning for evaluating the surface topography and dimensional tolerance quality of polymer gears produced via distinct manufacturing technologies. A structured-light 3D scanner was used to capture dense point clouds (exceeding 6 million points) of gears produced by three methods: conventional hobbing (POM-C), Material Extrusion (MEX) with carbon fiber reinforcement, and Selective Laser Sintering (SLS). The manufactured parts were compared against the nominal Computer Aided Design (CAD) models to evaluate their geometrical deviations in accordance with DIN 3961 and surface roughness parameters per ISO 25178. The experimental results revealed a consistent ranking of manufacturing quality. The conventionally hobbed POM-C gear exhibited superior precision, achieving DIN quality grades of Q9–Q10 and the smoothest surface finish (Sa = 5.0 µm). Among additive manufacturing techniques, SLS-printed PA 12 showed intermediate quality (Q11, Sa = 12 µm), whereas MEX-printed PPS-CF exhibited significant deviations (exceeding Q12) and the highest surface irregularity (Sa = 25 µm) due to stair-stepping effects. These findings indicate that while additive manufacturing offers geometric flexibility, conventional hobbing retains a decisive advantage in dimensional precision. The optical scanning methodology demonstrated here constitutes an efficient metrological framework for gear quality control, with potential applications extending to the quality assurance of additively manufactured adaptive fixtures and assembly tooling, including automotive assembly operations.