Experimental Evaluation of Vibration and Noise Responses of a Diesel Engine Fueled with Sour Cherry Pyrolytic Oil–Butanol–Diesel Blends with 2-EHN Additive

With rising global energy demand and the gradual depletion of petroleum-based resources, interest in alternative fuels for internal combustion diesel engines (ICDEs) has increased. In ICDEs, firing-related and mechanical excitations may result in adverse vibration and noise responses. This study examines whether incorporating sour cherry pit pyrolysis oil (SCPO) with n-butanol and 2-ethylhexyl nitrate (2-EHN) may reduce vibration and noise under constant-load, steady-state operating conditions compared with neat diesel (D100). For the experimental tests, five fuel types were prepared: one neat diesel fuel and four blended fuels with a constant diesel fraction of 40% and a fixed 2-ethylhexyl nitrate (2-EHN) content of 5%, while the SCPO and n-butanol fractions were varied (D40/SCPO0/B55/2-EHN5, D40/SCPO5/B50/2-EHN5, D40/SCPO10/B45/2-EHN5, and D40/SCPO15/B40/2-EHN5). Experiments were performed using a single-cylinder ICDE at a fixed load of 10 Nm under steady-state conditions at engine speeds of 1500, 1800, 2400, 3000, and 3600 rpm. For each operating condition, vibration and noise data were recorded over a 10.4 s window. Experimental findings indicate that D40/SCPO10/B45/2-EHN5 yielded the lowest mean overall RMS vibration, with a 37.5% reduction relative to neat diesel (D100), and the lowest equivalent sound level (LAeq) among the tested fuels. Under the investigated steady-state constant-load conditions, the D40/SCPO10/B45/2-EHN5 fuel blend demonstrates the potential to achieve lower measured vibration and noise levels than neat diesel.