Manufacturing-Induced Defect Taxonomy and Visual Detection in UD Tapes with Carbon and Glass Fiber Reinforcements

Continuous unidirectional (UD) thermoplastic composite tapes are increasingly used in aerospace, automotive, and energy applications because of their high specific strength, low weight, recyclability, and compatibility with automated manufacturing. Since final component performance strongly depends on tape quality, reliable defect characterization and detection are essential. In this study, manufacturing-induced defects in polypropylene-based UD tapes reinforced with carbon and glass fibers were investigated using real images acquired directly from laboratory-scale production without synthetic data. Defects related to interfacial integrity, matrix distribution, fiber architecture, and surface irregularities were systematically analyzed, and a practical four-class defect taxonomy was established. To enable automated inspection under limited-data conditions, lightweight YOLOv8, YOLOv11, and the new YOLO26 models were comparatively evaluated using a UD tape-specific augmentation strategy combining physically constrained Albumentations and on-the-fly augmentation. Among the tested models, YOLO26-s achieved the best overall performance, reaching a mean [email protected] of 0.87 ± 0.03, outperforming YOLOv11 (0.83) and YOLOv8 (0.78), with 0.90 precision and 0.85 recall. Interfacial (0.92 mAP) and matrix-related (0.90 mAP) defects were detected most reliably, whereas fiber-related (0.89 mAP) and surface defects (0.79 mAP) remained more challenging, particularly in glass-fiber-reinforced tapes due to transparency-masking effects. The results demonstrate the potential of compact deep learning models for computationally efficient and manufacturing-relevant in-line quality monitoring of UD tape production.