Mechanism of the EICP Centrifugal Cementation Method for Short-Term Brick Crack Rehabilitation

Traditional enzyme-induced carbonate precipitation (EICP) technology for brick crack rehabilitation is commonly plagued by solution clogging and low repair efficiency. To overcome these technical limitations, a novel centrifugal cementation method was proposed in this study, with its core innovation lying in decoupling the EICP reaction from the masonry reinforcement process. After the complete reaction of urease with the cementation solution, a high-concentration calcium carbonate colloid was extracted via centrifugation, which was then mixed with fine sand to prepare a repair mortar for direct injection into brick cracks. The experimental results, based on a single-factor design with a fixed soybean powder concentration (180 g/L, peak urease activity), showed that the maximum flexural strength of the repaired bricks reached 2.31 MPa, recovering as much as 122.9% of that of the cracked unrepaired bricks. Furthermore, the flexural strength of the repaired bricks exhibited a significant positive correlation with the calcium carbonate content (20–100%) and curing time (3–28 days). Phase analysis indicated that the repair mortar was primarily composed of calcite and quartz. The high shear force generated by centrifugation triggered explosive nucleation of calcium carbonate, and spherical calcite particles were formed through Ostwald ripening, exhibiting a distinct characteristic of decoupling between the spherical morphology and calcite crystal phase. The centrifugal cementation method proposed in this study achieves excellent short-term repair effects for masonry structures under laboratory conditions, thus providing a novel technical approach for the crack rehabilitation of masonry structures.