Ignitability of Building Materials Under Various Unintended Heat Sources

Building materials’ fire properties directly affect the fire risk of buildings. Ignition, the initiating event of any building fire, occurs when a heat source ignites surrounding combustible materials. Although several parameters—such as the Thermal Response Parameter (TRP), thermal inertia, ignition temperature, ignition time, critical heat flux (CHF), and heat of combustion—have been used to characterize ignition behavior, a unified metric capable of representing overall ignitability under diverse and often unknown and unintended heat source (UHS) patterns is generally lacking. To address this gap, we propose a new method to evaluate material ignitability by generalizing UHS patterns and linking them to known or readily obtainable material properties, including ignition temperature and thermal inertia. The UHS patterns are represented using lognormal distributions for both exposure duration and incident heat flux (IHF), reflecting conditions that may occur in real buildings. Monte Carlo simulations are employed to generate a large number of heat exposure events from these UHS patterns, enabling statistical determination of material ignitability. The method applies to both thermally thick and thermally thin materials, with a simple expression provided to determine the critical thickness separating these behaviors. Sensitivity analysis demonstrates that the ignitability metric is robust with respect to variations in the lognormal distribution parameters. The proposed ignitability metric provides a general measure of a material’s susceptibility to ignition under typical building fire scenarios and enables relative comparison of fire risk for buildings differing only in the materials adopted.