AI-Enhanced IoT Mechatronic Platform for Assisted Mobility and Safety Monitoring in Small Dogs Based on Laser-Induced Graphene Contact Temperature Sensing

Assistive mobility devices for small animals require reliable monitoring to ensure safe and comfortable operation without increasing system complexity or invasiveness. This study presents a low-cost monitoring platform that integrates a laser-induced graphene (LIG) contact-temperature sensor into a passive mobility device for small dogs, supported by a lightweight Internet of Things (IoT) architecture. The system combines contact temperature, ambient temperature, speed, and obstacle distance using an energy-aware acquisition strategy and prioritized wireless transmission for near-real-time monitoring. An unsupervised anomaly detection framework based on Isolation Forest identifies potentially unsafe operating conditions without labeled pathological data by leveraging absolute temperature and the differential feature ΔT between contact and ambient measurements. Experimental validation was conducted under controlled indoor conditions across six independent sessions with a small-breed dog, including static and dynamic phases to ensure repeatability. The system achieved packet delivery ratios of approximately 95%, with typical end-to-end latencies below 500 ms and worst-case delays below 850 ms. The proposed approach detected localized thermal deviations associated with friction or prolonged contact while remaining robust to normal activity- and environment-driven variations. These results demonstrate the feasibility of integrating LIG-based sensing and unsupervised analytics into assistive animal mobility platforms to enhance safety through continuous, non-invasive monitoring.