Methodology for Preliminary Evaluation of Photovoltaic Projects in Colombia Through Integration of Georeferenced Data and 3D Models (LiDAR)

This paper proposes a replicable, city-oriented workflow to support the preliminary screening of photovoltaic (PV) opportunities in Bogotá, Colombia, by integrating (i) georeferenced spatial inventories (roofs/land), (ii) solar-resource modeling based on local meteorological stations and radiation models, and (iii) an optional 3D module (LiDAR/DSM) to refine shading and orientation losses when higher-resolution data are available. Rather than claiming a complete citywide quantification from exhaustive building-level inputs, the workflow is demonstrated through two institutional case studies (public schools) selected to represent contrasting urban morphologies. The results show how the approach consistently transforms spatial constraints and solar estimates into comparable technical and economic indicators for decision-making at the site level. Finally, a practical scale-up pathway is described to extend the same logic from pilots to citywide portfolios through batch processing of urban footprints and the progressive enrichment of inputs—from 2D GIS screening to targeted 3D refinement—while preserving transparency and traceability of assumptions. For the two case study sites, the workflow yielded preliminary PV capacities of 72.6 and 95.0 kWp, with year-1 generation of 90.2 and 115.0 MWh, respectively. The IRR values achieved were between 18.9 and 19.5%, the simple payback period was approximately five years, and the LCOE was between 0.051 and 0.053 USD/kWh. It should be noted that the generation was reported as a central estimate with ±25% tolerance to reflect interannual solar resource variability.