3D Printed Ion-Selective Electrodes Enriched with ZnO Nanoparticles for Potassium Detection

Ion-selective electrodes (ISEs) are widely used analytical tools for the determination of specific ions in a variety of analytical applications due to their simplicity, selectivity, and low cost. Recent developments in materials science and digital fabrication have opened new opportunities for redesigning ISEs using modern manufacturing techniques. Here, we present a new application of 3D printing for fabricating potassium-selective electrodes using a simplified membrane composition. The 3D printing cocktail was prepared by mixing potassium tetraphenylborate, silver sulfide or graphite, and industrial ABS (acrylonitrile Butadiene Styrene) polymer. Membranes were tested both without and with the addition of ZnO nanoparticles. Incorporation of ZnO NPs significantly enhanced the electrode slope, while graphite-based membranes exhibited faster response, with potential stabilizing within 3-7 s across a concentration range of 4.88 × 10^-5 mol L^-1 to 1.00 × 10^-2 mol L^-1. The optimized 3D printed membrane containing 0.6% ZnO NPs showed near-Nernstian behaviour (slope: 59.178 mV per decade and <i>R</i>² = 0.9989), a limit of detection of 2.06 × 10^-5 mol L^-1 and high selectivity against common interfering ions. These results demonstrate that 3D printing combined with a suitable membrane composition and nanoparticle incorporation provides a versatile platform for rapid, reproducible, and high-performance potassium ISEs.