Comprehensive VLBI observations of Galileo satellites with the AuScope array

Abstract Interest in the topic of geodetic co-location in space and space ties has recently intensified within the geodetic community, particularly following the approval of the European Space Agency’s Genesis mission. From the perspective of very long baseline interferometry (VLBI), observations of Earth-orbiting satellites are not standard practice yet. To enable VLBI support for future co-location satellite missions, such observations must be integrated into the VLBI processing chain. In this study, we present comprehensive VLBI observations of Galileo navigation satellites conducted with the Australian AuScope VLBI array. Using the 12-m antennas in Hobart, Katherine, and Yarragadee equipped with VLBI Global Observing System instrumentation, Galileo E1 and E6 signals were observed in test experiments and a series of four full-scale 24-h observing sessions. We present the estimation of VLBI station coordinates from observations to navigation satellites, thereby demonstrating, for the first time, inter-technique ties between the VLBI and global navigation satellite system (GNSS) frame. We describe the processing strategy, including correlation, fringe fitting, precision assessment, and satellite tracking approach. Delay observables achieve precisions of a few picoseconds in the E1 band and several tens of picoseconds in the E6 band for 1-s integration times. However, unmodelled signals on the order of several hundred picoseconds are found in the residual delays. Estimated station coordinates agree with a priori values at the metre level, while baseline lengths agree at the sub-metre level. These results demonstrate the feasibility of large-scale VLBI observations to GNSS satellites and provide critical groundwork for future co-location satellite missions such as Genesis.