Recycle and Reuse of Calcium-Rich Waste in Brownfield: Review of Practices of Sludge Pond Reuse, Upper Kama Region (Russia)

The organization of safe industrial waste management is an integral part of the global sustainable development strategy. This study provides a preliminary assessment of the processing and recycling potential of strongly alkaline (pH 11–12) sediments accumulated in an abandoned sludge pond (Berezniki, Perm Krai, Russia), based on the initial characterization of their material composition. Sediment samples from the sludge pond were collected, layer-by-layer, over the entire depths of four sediment cores. The collected samples have the following characteristics: sediment particles are composed of up to 80% fine particles < 0.05 mm, with up to 20% fine particles < 0.002 mm. XRD data showed that the sediment consisted of calcite (67.7 wt.%), halite (11.5 wt.%), and other hydrogenic and terrigenous minerals. XRF data also found that the primary constituents in the sediment are CaO (up to 40%), Cl (up to 13%), and LOI (up to 35%). The results of the material composition study indicate a high degree of similarity between the accumulated sediments and solid waste from soda ash production, known as ammonia–soda residue (ASR). Based on experience with calcium-containing waste, this study recommends options for the secondary use of sludge, identifying two main possibilities: environmental protection and construction. We have developed an algorithm for the recycling and reuse of sludge that identifies risks, limitations, and recommended next steps. However, significant knowledge gaps regarding the environmental, toxicological, and the physical–mechanical properties of sludge prevent us from recommending a specific disposal option. The results of this review will serve as guidelines to help develop a roadmap for the disposal process. They will also inform decision-makers about sustainability issues related to industrial waste disposal.