Confinement property in the JT-60SA first operation phase

Abstract In JT-60SA, the global energy confinement time τ E has been evaluated to be 0.1-0.2 s for 1 MA hydrogen discharges and compared with the ITERL-96P(th) scaling. Because local measurements of ion temperature T i , electron density and effective charge are not available in the first operation phase and the number of discharges and their parameter range are limited, the present results should not be considered definitive. As heating power increased, τ E tends to shorten in the same trend as the scaling. τ E is shorter than the scaling but approaches the scaling with increasing density. For 0.4-0.6 MW ohmic heating plasmas, τ E increases with increasing collisionality and saturates. For 0.6-0.8 MW ohmic heating and electron cyclotron resonance heating (ECH) plasmas, τ E continues to increase up to higher collisionality and reaches the scaling. The turbulence simulations with the trapped gyroLandau-fluid model assuming a linear T i profile show that the dominant turbulence mode is trapped electron modes. The linear growth rate decreases with increasing collisionality and saturates at a low level in the 0.4-0.6 MW ohmic heating plasma, suggesting the transition from the linear ohmic confinement regime to the saturated ohmic confinement regime. For 0.6-0.8 MW ohmic heating and ECH plasmas, the saturation occurs at higher collisionality, indicating that the linear confinement regime extends to higher collisionality. The global particle confinement time excluding recycling contributions, τ p , has also been evaluated to be 0.301±0.015 s, approximately twice τ E , from the frequency responses in a density feedback control experiment. From τ p and the effective particle confinement time including recycling τ p * , a recycling coefficient is obtained as 0.865±0.013. The sub-unity recycling coefficient indicates that wall recycling is insufficient to maintain plasma density, consistent with hydrogen retention due to the first hydrogen discharge with continuous gas injection.

Authors

Institutions

Publication Details

Journal
Nuclear Fusion
Published
2026-11-16
DOI
https://doi.org/10.1088/1741-4326/aec27c
Primary Topic
Magnetic confinement fusion research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Confinement property in the JT-60SA first operation phase

Inoue Shizuo, Nakano Tomohide, Sano Ryuichi, Ohtani Yoshiaki et al.
2 links
Nuclear Fusion
Magnetic confinement fusion research
article

Confinement property in the JT-60SA first operation phase

Inoue Shizuo, Nakano Tomohide, Sano Ryuichi, Ohtani Yoshiaki, Yoshida Maiko, Urano Hajime, Yokoyama Tatsuya, Wakatsuki Takuma
article en

Abstract

Abstract In JT-60SA, the global energy confinement time τ E has been evaluated to be 0.1-0.2 s for 1 MA hydrogen discharges and compared with the ITERL-96P(th) scaling. Because local measurements of ion temperature T i , electron density and effective charge are not available in the first operation phase and the number of discharges and their parameter range are limited, the present results should not be considered definitive. As heating power increased, τ E tends to shorten in the same trend as the scaling. τ E is shorter than the scaling but approaches the scaling with increasing density. For 0.4-0.6 MW ohmic heating plasmas, τ E increases with increasing collisionality and saturates. For 0.6-0.8 MW ohmic heating and electron cyclotron resonance heating (ECH) plasmas, τ E continues to increase up to higher collisionality and reaches the scaling. The turbulence simulations with the trapped gyroLandau-fluid model assuming a linear T i profile show that the dominant turbulence mode is trapped electron modes. The linear growth rate decreases with increasing collisionality and saturates at a low level in the 0.4-0.6 MW ohmic heating plasma, suggesting the transition from the linear ohmic confinement regime to the saturated ohmic confinement regime. For 0.6-0.8 MW ohmic heating and ECH plasmas, the saturation occurs at higher collisionality, indicating that the linear confinement regime extends to higher collisionality. The global particle confinement time excluding recycling contributions, τ p , has also been evaluated to be 0.301±0.015 s, approximately twice τ E , from the frequency responses in a density feedback control experiment. From τ p and the effective particle confinement time including recycling τ p * , a recycling coefficient is obtained as 0.865±0.013. The sub-unity recycling coefficient indicates that wall recycling is insufficient to maintain plasma density, consistent with hydrogen retention due to the first hydrogen discharge with continuous gas injection.

Nuclear Fusion
Japan Atomic Energy Agency (JP), National Institutes for Quantum Science and Technology (JP)
Magnetic confinement fusion research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon