Design and Optimization of Improved Double Stator Cylindrical Linear Oscillating Generator with Curved Tooth Structure

Double stator cylindrical linear oscillating generators (DSCLOGs) have been widely used in renewable energy power generation systems due to their higher power density, higher reliability, and low-noise characteristics. However, the detent force of a DSCLOG is an inevitable problem, which causes oscillations in the generator and leads to system instability. Conventionally, auxiliary teeth and skewed pole methods are employed to mitigate detent force, but these approaches often increase the overall machine size and the complexity of the manufacturing process. To solve this issue, an improved DSCLOG with curved teeth (CT-DSCLOG) is proposed to minimize the detent force. First, the structural characteristics and working principle of CT-DSCLOG are introduced. Then, to achieve a rapid and accurate analysis of the magnetic field in the irregular air gap, a 2D magnetic equivalent circuit (MEC) model is established by introducing Schwarz–Christoffel (S-C) mapping. And key structural parameters are identified through variance sensitivity analysis. Subsequently, a multi-objective optimization of the linear generator is performed using the Taguchi method combined with 3D finite element analysis (3D-FEA) to obtain the optimal structural parameters of CT-DSCLOG. Finally, the proposed structure is validated through prototype experiments. The results are provided to validate the effectiveness of the proposed structure.