Design and Analysis of Solar Systems for Agricultural Applications and Sustainable Energy Supply of Villages

This paper presents the design and analysis of solar systems for agricultural applications and the sustainable energy supply of villages, based on a case study of a rural settlement comprising 30 households. The village energy demand is quantified through a detailed assessment of hourly load profiles for daytime and nighttime operation, identifying peak loads and total daily energy consumption. Energy usage patterns are established for residential buildings, agricultural water pumping, public lighting, healthcare facilities, and commercial services. To meet these energy requirements sustainably, a 60 kW photovoltaic (PV) system is proposed in combination with a solar thermal water heating system designed to supply domestic and agricultural hot water. This study details the design methodology and simulation of the solar thermal system, including heat transfer modeling and system dimensioning. MATLAB (V.22b) simulations are conducted to evaluate system performance, covering PV energy generation, battery charge–discharge cycles, and thermal behavior over a 24 h period. Comparative analyses of standalone PV, hybrid PV/T, and combined PV and solar thermal configurations demonstrate that separate PV and thermal systems provide superior cost-effectiveness, operational reliability, and reduced maintenance requirements. The results confirm the technical feasibility, economic viability, and environmental benefits of solar-based solutions for rural electrification and agricultural applications. The results indicate that the analyzed rural settlement has an estimated daily electricity demand of approximately 590 kWh. Based on this demand, a 60 kW photovoltaic system was selected to ensure sufficient daytime electricity production while also allowing battery charging for nighttime consumption. In addition, the solar thermal system can increase the water temperature from approximately 10 °C to 55–80 °C, depending on solar irradiance conditions. The combined PV and solar thermal configuration demonstrates the potential to provide a reliable and sustainable energy solution for rural off-grid communities.