Design of Cobalt-Free High-Entropy Alloy Binder for WC-Base Cemented Carbides

Cemented carbides are essential in applications requiring exceptional hardness and wear resistance. However, the reliance on cobalt as a binder raises concerns related to cost, supply security, and health. High-entropy alloys (HEAs) are promising cobalt-free binders offering favorable mechanical properties and potential grain-growth control. This work presents a new approach for the development of Co-free WC-based cemented carbide employing an HEA binder designed through CALPHAD-guided simulations. An optimized composition corresponding to Al5Cr5Cu10Fe35Mn10Ni35 (at%) alloy is predicted to be FCC-dominant with minimal σ-phase formation and good compatibility with WC. A preliminary batch of powder of the proposed binder was produced by blending elemental powders, arc remelting, and ultrasonic atomization, yielding predominantly spherical particles with a dendritic microstructure. WC–HEA composites (WC–12 wt% HEA) were then prepared by ball milling, pressing, vacuum sintering, and sinter-HIP for a first evaluation of the microstructure and achievable hardness. The microstructure exhibited residual porosity without significant WC grain coarsening. XRD analyses showed the dominant presence of WC, along with FCC and M3W3C phases (M mainly Fe and Mn), indicating thermal interaction between the binder and WC. Despite these effects, the composite achieved a hardness of 1913 HV and retained a fine WC grain size (0.86 μm). The proposed design approach allowed the definition of a promising Co-free binder composition based on HEA with the expected microstructure, which will need further evaluation, especially aimed at investigating toughness properties as a function of the WC content.