Load Characteristics in the Cutting of Three Types of Bauxite by Conical Picks

Underground bauxite comprehensive mechanized mining has attracted growing attention, yet regional differences in bauxite characteristics challenge its applicability and economic efficiency. The conical pick, a key cutting tool for this mining method, has cutting load characteristics that directly impact the cutting mechanism’s efficiency and reliability. Three typical bauxite samples from different mining areas were selected as research objects. After testing their composition and firmness coefficients, a linear cutting test bench was used to measure their tri-axial cutting forces at various cutting depths. Regression analysis and the linear fitting of cutting coefficients were conducted to study cutting force and normal force (two core cutting loads). The results show that power functions effectively describe the relationships between the cutting force, normal force, fluctuation coefficient and cutting depth. As the bauxite firmness coefficient and cutting depth rise, the cutting force peak value, fluctuation amplitude and frequency all increase. Excessively high or low cutting coefficients reduce the cutting efficiency; only when both the cutting coefficient and the depth are in an optimal range can the cutting efficiency reach its maximum.