Formation of a Low-Porosity Bonding Layer with Enhanced Adhesive Strength via Gas-Thermal Spraying

Thermal barrier coatings (TBCs) are an effective means of providing thermal insulation and protecting the hot-section components of gas turbine engines. Their quality and performance characteristics largely depend on the microstructural features and the bond strength between the bonding layer and the substrate. The present study aims to determine the optimal plasma spraying parameters that ensure the formation of NiCrAlY coatings with superior microstructural integrity and adhesion strength. The objective of the study is a thermally sprayed nickel–chromium–aluminum–yttrium (NiCrAlY) bond coat deposited onto an Inconel 718 nickel-based superalloy, which is widely used in aircraft gas turbine engines due to its high strength and excellent oxidation resistance at elevated temperatures. It was found that the coating produced under the optimized conditions exhibited a significantly higher adhesion strength compared with the samples obtained under other spraying regimes. The results confirm that a precise adjustment of the atmospheric plasma spraying (APS) process parameters, taking into account the equipment configuration, allows for a substantial improvement in coating quality and performance.