Innovative multi-resonant plasmonic cup-shaped biosensors for ultra-wide detection ranges and ultra-low detection limits. The case of interleukin-1β detection

In this work, an innovative multi-resonant plasmonic cup-shaped platform was designed, developed, and combined with a bioreceptor layer to address two key issues in biosensing: the ultra-low limit of detection (LOD) and the ultra-wide detection range. A cup-shaped optical waveguide was utilized to achieve surface plasmon resonance (SPR) phenomena, exploiting a single fabrication step and featuring an integrated measurement cell, which enables easy integration into rapid and cost-effective point-of-care tests (POCTs). Changing the optical path in the cup-shaped waveguide, its peculiar geometry allows different plasmonic resonances to be triggered and monitored. To this end, as a proof-of-concept, three experimental configurations were explored and tested by simply changing the altitude from which light is launched/collected to/from the plasmonic cup-shaped waveguide through plastic optical fibers (POFs). For all three experimental configurations, the plasmonic cup-shaped sensor was first optically characterized to determine its bulk sensitivity. Then, after a functionalization procedure of the gold nanofilm with a bioreceptor layer specific for interleukin-1β (IL-1β) detection, the plasmonic cup-shaped biosensor was characterized to obtain the binding performance parameters. More specifically, the multi-resonant plasmonic biosensor demonstrated selective detection of IL-1β, an ultra-low LOD (at femtomolar concentration), and an ultra-wide detection range (about five orders of magnitude) using the same functionalized sensing area monitored differently. The experimental results reveal the potential of the SPR cup-shaped biosensor in terms of performance, versatility, and its ability to achieve a scalable and low-cost point-of-care device. • Innovative multi-resonant plasmonic cup-shaped waveguides for biosensing • Simple and low-cost plasmonic sensor chip with integrated measurement cell • Three experimental configurations to excite surface plasmon resonance phenomena • Binding tests for selective IL-1β detection are obtained as a proof-of-concept • Ultra-low limit of detection and ultra-wide detection range are demonstrated

Authors

Institutions

Publication Details

Journal
Sensors and Actuators B Chemical
Published
2026-03-09
DOI
https://doi.org/10.1016/j.snb.2026.139796
Primary Topic
Plasmonic and Surface Plasmon Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Innovative multi-resonant plasmonic cup-shaped biosensors for ultra-wide detection ranges and ultra-low detection limits. The case of interleukin-1β detection

Chiara Marzano, Nunzio Cennamo, Stefano Toldo, Rosalba Pitruzzella et al.
Sensors and Actuators B Chemical
Plasmonic and Surface Plasmon Research
article

Innovative multi-resonant plasmonic cup-shaped biosensors for ultra-wide detection ranges and ultra-low detection limits. The case of interleukin-1β detection

Chiara Marzano, Nunzio Cennamo, Stefano Toldo, Rosalba Pitruzzella, Francesco Arcadio, A A Antonio Abbate, Luigi Zeni
article en

Abstract

In this work, an innovative multi-resonant plasmonic cup-shaped platform was designed, developed, and combined with a bioreceptor layer to address two key issues in biosensing: the ultra-low limit of detection (LOD) and the ultra-wide detection range. A cup-shaped optical waveguide was utilized to achieve surface plasmon resonance (SPR) phenomena, exploiting a single fabrication step and featuring an integrated measurement cell, which enables easy integration into rapid and cost-effective point-of-care tests (POCTs). Changing the optical path in the cup-shaped waveguide, its peculiar geometry allows different plasmonic resonances to be triggered and monitored. To this end, as a proof-of-concept, three experimental configurations were explored and tested by simply changing the altitude from which light is launched/collected to/from the plasmonic cup-shaped waveguide through plastic optical fibers (POFs). For all three experimental configurations, the plasmonic cup-shaped sensor was first optically characterized to determine its bulk sensitivity. Then, after a functionalization procedure of the gold nanofilm with a bioreceptor layer specific for interleukin-1β (IL-1β) detection, the plasmonic cup-shaped biosensor was characterized to obtain the binding performance parameters. More specifically, the multi-resonant plasmonic biosensor demonstrated selective detection of IL-1β, an ultra-low LOD (at femtomolar concentration), and an ultra-wide detection range (about five orders of magnitude) using the same functionalized sensing area monitored differently. The experimental results reveal the potential of the SPR cup-shaped biosensor in terms of performance, versatility, and its ability to achieve a scalable and low-cost point-of-care device. • Innovative multi-resonant plasmonic cup-shaped waveguides for biosensing • Simple and low-cost plasmonic sensor chip with integrated measurement cell • Three experimental configurations to excite surface plasmon resonance phenomena • Binding tests for selective IL-1β detection are obtained as a proof-of-concept • Ultra-low limit of detection and ultra-wide detection range are demonstrated

Sensors and Actuators B ChemicalVol. 458
University of Campania "Luigi Vanvitelli" (IT), University of Virginia (US)
Openalex Percentile: Top 30%
Plasmonic and Surface Plasmon Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.