Simulation Study of a Distributed Fiber Optic Vibration Sensing System Using Dual-Chirped Pulses and Frequency Division Multiplexing

This paper proposes a distributed vibration sensing system based on dual-chirped pulses and weak fiber Bragg gratings. Compared with conventional dual-pulse heterodyne detection techniques, the proposed approach utilizes the time-frequency characteristics of chirp signals, effectively relaxing the stringent requirements on the signal pulse width. In addition, when chirp signals with different chirp rates are adopted, frequency-division multiplexing technology can be realized to enhance the system’s response bandwidth. Last but not least, the sensing probe signal is generated in the optical domain using microwave photonic technology, which theoretically helps alleviate the dependence on arbitrary waveform generators. A simulation study on the system was conducted. Using a chirp signal of 200 MHz/μs and with a grating spacing of 50 m, the desired vibration signal is phased modulated onto a beat signal with a frequency of 100 MHz, and the allowable pulse width can be up to 500 ns. To verify frequency-division multiplexing capability further, an additional pair of chirped pulses with a chirp rate of 400 MHz/μs was introduced into the system, which was generated by frequency multiplication. The results demonstrate that the system response bandwidth is increased to twice the original bandwidth. The proposed scheme provides a new solution for performance enhancement in a distributed fiber optic vibration sensing system.