Metro-Induced Vibration Wave Propagation and Rail Defect Diagnostics: Integrated Experimental Measurements and Finite Element Modelling

Railway transport is increasingly promoted as a sustainable and low-carbon mode of transportation. However, track-induced vibration propagation remains a significant challenge, particularly in metro systems situated near residential areas, where vibrations can transmit through the infrastructure into nearby buildings, disturbing residents and damaging structures. This study aimed to evaluate the cause of the significantly different vibration impact on nearby buildings caused by two nominally identical adjacent slab tracks on a metro line in Austria. Controlled weight drop tests were carried out in both track directions, and accelerations were measured to characterize wave transmission and energy dissipation. The data were processed using frequency response functions and Short-Time Fourier Transform to extract time–frequency signatures, modal parameters, and propagation delays. A three-dimensional finite element model of the railway superstructure was then calibrated against the experimental modal properties and transfer functions and used to simulate cracking or stiffness loss in the sleeper–slab region. The simulations reproduced the observed increase in slab acceleration and underground strain energy, linking the anomalous vibration transmission to hidden stiffness loss rather than to global design differences. Overall, the study demonstrates that combining impact testing, advanced signal processing, and calibrated finite element modelling provides an effective framework for diagnosing track defects and guiding the design and maintenance of more sustainable, low-vibration urban rail infrastructure.