Vortical flows over spinning cones at incidence

Vortical flows over spinning cones with half-angles of $\theta _c =$ $10^\circ$ , $15^\circ$ , $22.5^\circ$ , $30^\circ$ and $45^\circ$ at incidence angles of $\alpha$ between 0 $^\circ$ and 36 $^\circ$ are experimentally studied employing smoke streak flow visualisation and planar particle image velocimetry at Reynolds numbers of $\mathcal{O}(10^4)$ and base rotational speed ratios between 0 and 3. Symmetric vortex triads are observed on the leeward side of the stationary cones at incidence that grow in cross-section and strength along the surface. Spin breaks down this symmetry. Asymmetries in the vortex systems over the spinning cones are characterised by anti-cyclonic vortices forming in the counter-rotating meridian and cyclonic vortices in the co-rotating meridian. The anti-cyclonic vortices increase in strength as they are pushed in the direction of rotation and embrace the surface of the cone, whereas cyclonic vortices detach from the surface and exhibit unchanging vortex strength. For the most slender cone of $\theta _c = 10^\circ$ , the cyclonic vortices are pushed past the plane of symmetry into the counter-rotating meridian and are squeezed between the anti-cyclonic vortex and the surface of the cone. This appears to trigger the detachment of the anti-cyclonic vortices. The thickest cone of $\theta _c = 45^\circ$ exhibits characteristics similar to flows over a disc (Kuraan & Savaş J. Visual. vol. 23 , 2024, pp. 191–205), a limiting case of the cone family. As $\alpha$ increases, the stagnation point departs from the vertex and monotonically shifts along the windward surface. Regular vortex shedding events in the wake region behind the $\theta _c=45^\circ$ cone are detected in the streakline images, also a common characteristic of flows over discs. Wave patterns are observed near the leeward surface of spinning cones, which are likely signatures of the well-known centrifugal spiral wave instabilities. The bead-like features leave small-scale wave patterns on detached portions of the neighbouring trailing vortices. Inclined wave patterns form on streaklines over the entire surface of the cones, and are present in both non-spinning and spinning cases; hence, they are likely signatures of classical cross-flow boundary layer instabilities.

Authors

Institutions

Publication Details

Journal
Journal of Fluid Mechanics
Published
2026-03-03
DOI
https://doi.org/10.1017/jfm.2026.11249
Primary Topic
Fluid Dynamics and Thin Films
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Vortical flows over spinning cones at incidence

Ömer Savaş, Abdullah M. Kuraan
Journal of Fluid Mechanics
Fluid Dynamics and Thin Films
article

Vortical flows over spinning cones at incidence

Ömer Savaş, Abdullah M. Kuraan
article en

Abstract

Vortical flows over spinning cones with half-angles of $\theta _c =$ $10^\circ$ , $15^\circ$ , $22.5^\circ$ , $30^\circ$ and $45^\circ$ at incidence angles of $\alpha$ between 0 $^\circ$ and 36 $^\circ$ are experimentally studied employing smoke streak flow visualisation and planar particle image velocimetry at Reynolds numbers of $\mathcal{O}(10^4)$ and base rotational speed ratios between 0 and 3. Symmetric vortex triads are observed on the leeward side of the stationary cones at incidence that grow in cross-section and strength along the surface. Spin breaks down this symmetry. Asymmetries in the vortex systems over the spinning cones are characterised by anti-cyclonic vortices forming in the counter-rotating meridian and cyclonic vortices in the co-rotating meridian. The anti-cyclonic vortices increase in strength as they are pushed in the direction of rotation and embrace the surface of the cone, whereas cyclonic vortices detach from the surface and exhibit unchanging vortex strength. For the most slender cone of $\theta _c = 10^\circ$ , the cyclonic vortices are pushed past the plane of symmetry into the counter-rotating meridian and are squeezed between the anti-cyclonic vortex and the surface of the cone. This appears to trigger the detachment of the anti-cyclonic vortices. The thickest cone of $\theta _c = 45^\circ$ exhibits characteristics similar to flows over a disc (Kuraan & Savaş J. Visual. vol. 23 , 2024, pp. 191–205), a limiting case of the cone family. As $\alpha$ increases, the stagnation point departs from the vertex and monotonically shifts along the windward surface. Regular vortex shedding events in the wake region behind the $\theta _c=45^\circ$ cone are detected in the streakline images, also a common characteristic of flows over discs. Wave patterns are observed near the leeward surface of spinning cones, which are likely signatures of the well-known centrifugal spiral wave instabilities. The bead-like features leave small-scale wave patterns on detached portions of the neighbouring trailing vortices. Inclined wave patterns form on streaklines over the entire surface of the cones, and are present in both non-spinning and spinning cases; hence, they are likely signatures of classical cross-flow boundary layer instabilities.

Journal of Fluid MechanicsVol. 1030
University of California System (US)
National Science Foundation
Openalex Percentile: Top 33%
Fluid Dynamics and Thin Films
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.