Application of Sliding Zone Similar Materials in Reservoir Landslide Model Tests Considering Mechanical and Seepage Similarity

Model tests are effective for studying the entire deformation and evolution process of reservoir landslides. The sensitivity of similar materials to seepage effects is crucial to the accuracy of landslide model testing. Based on a fuzzy evaluation of in situ sliding zone soil, this study compared three similar materials, using shear tests and microscopic SEM to assess the similarity. The optimal similar material (sliding zone soil: bentonite: standard sand = 50%: 20%: 30%) with a water content of 13.5% and a permeability coefficient of 3.8 × 10−6 cm/s was identified, simultaneously matching physical–mechanical properties and seepage effects. When the proportion of in situ sliding zone soil exceeds that of bentonite, the in situ sliding zone soil dominates the strength. Cohesion depends on interparticle cementation force and water film viscosity. Bentonite modifies these forces in stages, leading to a trend where cohesion (c′) first increases and then decreases with rising water content, while the internal friction angle (φ’) decreases continuously. Model test results indicate the failure mode of reservoir landslides is a three-stage traction-braking failure, evolving from initial shallow deformation to deep progressive failure and finally to overall large-scale instability. The proposed similar material exhibits reliable physical–mechanical and seepage similarity and can be directly applied in physical model tests of reservoir-induced landslides to reproduce the hydro-mechanical coupling behavior of sliding zones.