Numerical Investigation of Thermal–Hydraulic–Structural Characteristics of Supercritical CO2 Wavy-Microchannel Heat Exchanger

The supercritical carbon dioxide (SCO2) Brayton cycle presents a promising alternative to the traditional steam Rankine cycle, owing to its superior thermal efficiency, high power density, and compact design. As a key component governing system performance, the heat exchanger requires a highly compact and efficient design. This study proposes a novel additively manufactured (AM) wavy microchannel heat exchanger that achieves a compactness of 1670 m2/m3. The design incorporates adaptive flow channels to accommodate SCO2’s density variation, along with wavy patterns and ribs to enhance thermal performance. A comprehensive fluid–thermal–mechanical coupling numerical analysis was conducted to evaluate its thermal–hydraulic and mechanical performance. Within the Reynolds number range of about 900–6000, the wavy structures improve the heat transfer rate by 21–58%, compared with the straight channel. The maximum effectiveness (ε = 0.66) occurs at a Reynolds number of 900. Compared with other heat exchangers used in the SCO2 cycle, the overall performance of the hot and cold channels has improved by 12–44% and 3–89%, respectively. Structural analysis confirms that the average total stress under operating conditions remains below the yield strength of the Inconel 617 material, with thermal stress being the dominant contributor. This work underscores the potential of the proposed AM heat exchanger to deliver a superior combination of compactness, thermal–hydraulic performance, and structural integrity for advanced SCO2 power cycles.