Thin‐Wall Single‐Crystal Gold Nanoelectrodes toward Advanced Chemical Probing and Imaging

Thin-wall metal ultramicro- and nanoelectrodes (UMEs/NEs), especially gold-based ones, are key probes for high-resolution electrochemical microscopy, biosensing, and nanoscale interfacial studies. Yet, their broader use remains limited by fragility, low detection sensitivity, and the lack of scalable fabrication methods. Here, we present a template-assisted, non-self-limited polyol-based growth strategy that realizes single-crystalline, thin-walled Au UMEs/NEs, as well as multifunctional probes, with high yield (>80%). The method provides precise control over electrode dimensions, from sub-100 nm to micron-scale radii while the massively parallel polyol growth step overcomes the key bottleneck in scalable nanoelectrode preparation by reliably producing long, continuous single-crystal metal cores. Structural and electrochemical characterization confirm twinned single-crystal Au cores, seamless Au/glass interfaces, and stable performance. Through direct comparison across radii, we show that smaller electrodes consistently exhibit higher surface reactivities, boosting chemical detection sensitivity. In scanning photoelectrochemical microscopy, these NEs achieve an illumination-dependent spatial resolution of ∼250 nm, <1 pA current sensitivity, a detection limit of ∼11.0 µm, and over 7 h of operational stability. In bulk electrolytes, the single-crystalline electrodes achieve ultralow detection limits down to 79 nm, markedly enhancing the signal-to-noise ratio in nanoscale electrochemical measurements. Finally, we demonstrate growth in double-barrel pipettes for multifunctional probes and extend the approach to Pt NEs. This scalable method overcomes longstanding limitations in NE fabrication, enabling advanced electrochemical imaging and its combination with tip-enhanced spectroscopic methods. The single-crystalline architecture also opens new frontiers in catalysis, interfacial electrochemistry, biosensing, and molecular-scale investigations.

Authors

Institutions

Publication Details

Journal
Small
Published
2026-02-26
DOI
https://doi.org/10.1002/smll.202514938
Primary Topic
Electrochemical Analysis and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Thin‐Wall Single‐Crystal Gold Nanoelectrodes toward Advanced Chemical Probing and Imaging

Milad Sabzehparvar, Giulia Tagliabue, Fatemeh Kiani, Lucie Navratilova et al.
Small
Electrochemical Analysis and Applications
article

Thin‐Wall Single‐Crystal Gold Nanoelectrodes toward Advanced Chemical Probing and Imaging

Milad Sabzehparvar, Giulia Tagliabue, Fatemeh Kiani, Lucie Navratilova, Victor Boureau, Omer Can Karaman, Germán García Martínez
article en

Abstract

Thin-wall metal ultramicro- and nanoelectrodes (UMEs/NEs), especially gold-based ones, are key probes for high-resolution electrochemical microscopy, biosensing, and nanoscale interfacial studies. Yet, their broader use remains limited by fragility, low detection sensitivity, and the lack of scalable fabrication methods. Here, we present a template-assisted, non-self-limited polyol-based growth strategy that realizes single-crystalline, thin-walled Au UMEs/NEs, as well as multifunctional probes, with high yield (>80%). The method provides precise control over electrode dimensions, from sub-100 nm to micron-scale radii while the massively parallel polyol growth step overcomes the key bottleneck in scalable nanoelectrode preparation by reliably producing long, continuous single-crystal metal cores. Structural and electrochemical characterization confirm twinned single-crystal Au cores, seamless Au/glass interfaces, and stable performance. Through direct comparison across radii, we show that smaller electrodes consistently exhibit higher surface reactivities, boosting chemical detection sensitivity. In scanning photoelectrochemical microscopy, these NEs achieve an illumination-dependent spatial resolution of ∼250 nm, <1 pA current sensitivity, a detection limit of ∼11.0 µm, and over 7 h of operational stability. In bulk electrolytes, the single-crystalline electrodes achieve ultralow detection limits down to 79 nm, markedly enhancing the signal-to-noise ratio in nanoscale electrochemical measurements. Finally, we demonstrate growth in double-barrel pipettes for multifunctional probes and extend the approach to Pt NEs. This scalable method overcomes longstanding limitations in NE fabrication, enabling advanced electrochemical imaging and its combination with tip-enhanced spectroscopic methods. The single-crystalline architecture also opens new frontiers in catalysis, interfacial electrochemistry, biosensing, and molecular-scale investigations.

Small
École Polytechnique Fédérale de Lausanne (CH)
Openalex Percentile: Top 42%
Electrochemical Analysis and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.