Kenaf Core as an Alternative Soilless Growing Medium: A Review

Kenaf (<i>Hibiscus cannabinus</i>) core, an abundant renewable byproduct rich in cellulose and hemicellulose, has emerged as a candidate to replace or supplement peat and coco coir in soilless culture. This review synthesizes the physical, chemical, and biological performance of ground kenaf core and benchmarks it against conventional substrates. Kenaf core exhibits low bulk density (0.06 to 0.15 g cm^-3), high total porosity (approximately 90%), and substantial plant available water (approximately 42%), supporting root aeration and water supply. Its pH (6.0-7.2) is near optimal for most crops, whereas electrical conductivity (EC) (3.2-4.7 dS m^-1) can exceed recommended ranges for salt-sensitive species, which necessitates pre-leaching or blending. Growth studies show comparable shoot and root performance in blends containing 20 to 70% kenaf, with composted kenaf often outperforming raw core. Pure kenaf generally requires more frequent irrigation and may shrink at high proportions. We outline processing variables such as core purity, particle size, composting, and leaching that govern stability and plant response, identify critical data gaps (including standardized EC and pH methods, and long-term shrinkage), and frame a sustainability agenda. Practically, studies to date indicate that pre-leached kenaf core, incorporated at up to about 70% by volume into peat or coir-based blends with structurally stable components such as perlite, can maintain growth and quality for several ornamental and bedding crops under greenhouse and nursery conditions. At the same time, reports of poor performance in some conifers and early suppression in direct-sown vegetables underscore that the suitability of kenaf-based substrates remains crop specific and dependent on material processing and management.