Cascade electrocatalysis via Cu-O-C interfaces for ultralow-Pd formate oxidation

Direct formate fuel cells (DFFCs) are promising clean-energy devices, yet the efficiency of Pd-based anodes is limited by the strong adsorption of reaction intermediates, particularly adsorbed hydrogen (H ad ). This blockage of active sites raises the overpotential and slows reaction kinetics, while compensating with high Pd loading further increases cost. Here, we design a Pd-lean catalyst featuring a dual-function interface that simultaneously mitigates intermediate poisoning and enhances precious-metal utilization. The catalyst consists of Cu-rich Pd-Cu nanoparticles (∼2-3 nm) anchored on carbon nanotubes coated with a tannic-acid-derived, oxygen-doped carbon layer. The engineered Cu-O-C interface promotes water dissociation at low potentials, supplying interfacial hydroxyl species (OH ad ), while Cu alloying downshifts the Pd d-band center, significantly weakening the Pd-H binding energy (HBE) and facilitating H ad desorption. This cascade electrocatalysis accelerates the H ad -OH ad coupling step, which is the rate-determining step in formate oxidation, thereby enabling rapid regeneration of active sites. As a result, the catalyst achieves a peak mass activity of 5.59 A mgPd -1 at -0.31 V (vs. Hg/HgO), which is 4.9 times higher than that of commercial Pd/C. Remarkably, this performance is obtained with an ultralow Pd loading of only 1.54 wt %, demonstrating exceptional precious-metal utilization efficiency. • Developed a Cu-rich PdCu alloy catalyst with an ultralow Pd loading of 1.54 wt%, substantially reducing the precious-metal cost for efficient formate oxidation. • Unveiled a cascade electrocatalysis mechanism for the FOR through a spatially organized interface, where a Cu-O-C structure supplies OHad adjacent to Cu-rich PdCu alloy sites that favor Had/COad desorption. • Achieved a superior FOR mass activity of 5.59 A mg Pd -1 (4.86 times that of commercial Pd/C), which compellingly demonstrates its exceptional anti-poisoning capability.

Authors

Institutions

Publication Details

Journal
Applied Catalysis B: Environmental
Published
2026-02-22
DOI
https://doi.org/10.1016/j.apcatb.2026.126599
Primary Topic
Electrocatalysts for Energy Conversion
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Cascade electrocatalysis via Cu-O-C interfaces for ultralow-Pd formate oxidation

Linlin Yang, Fan Yu, Qian Xue, Xiaojie Qi et al.
Applied Catalysis B: Environmental
Electrocatalysts for Energy Conversion
article

Cascade electrocatalysis via Cu-O-C interfaces for ultralow-Pd formate oxidation

Linlin Yang, Fan Yu, Qian Xue, Xiaojie Qi, Jordi Arbiol, Andreu Cabot, Wu Jiang, Deqin He, Jing Yu, Yi Zeng, Hu Yuan
article en

Abstract

Direct formate fuel cells (DFFCs) are promising clean-energy devices, yet the efficiency of Pd-based anodes is limited by the strong adsorption of reaction intermediates, particularly adsorbed hydrogen (H ad ). This blockage of active sites raises the overpotential and slows reaction kinetics, while compensating with high Pd loading further increases cost. Here, we design a Pd-lean catalyst featuring a dual-function interface that simultaneously mitigates intermediate poisoning and enhances precious-metal utilization. The catalyst consists of Cu-rich Pd-Cu nanoparticles (∼2-3 nm) anchored on carbon nanotubes coated with a tannic-acid-derived, oxygen-doped carbon layer. The engineered Cu-O-C interface promotes water dissociation at low potentials, supplying interfacial hydroxyl species (OH ad ), while Cu alloying downshifts the Pd d-band center, significantly weakening the Pd-H binding energy (HBE) and facilitating H ad desorption. This cascade electrocatalysis accelerates the H ad -OH ad coupling step, which is the rate-determining step in formate oxidation, thereby enabling rapid regeneration of active sites. As a result, the catalyst achieves a peak mass activity of 5.59 A mgPd -1 at -0.31 V (vs. Hg/HgO), which is 4.9 times higher than that of commercial Pd/C. Remarkably, this performance is obtained with an ultralow Pd loading of only 1.54 wt %, demonstrating exceptional precious-metal utilization efficiency. • Developed a Cu-rich PdCu alloy catalyst with an ultralow Pd loading of 1.54 wt%, substantially reducing the precious-metal cost for efficient formate oxidation. • Unveiled a cascade electrocatalysis mechanism for the FOR through a spatially organized interface, where a Cu-O-C structure supplies OHad adjacent to Cu-rich PdCu alloy sites that favor Had/COad desorption. • Achieved a superior FOR mass activity of 5.59 A mg Pd -1 (4.86 times that of commercial Pd/C), which compellingly demonstrates its exceptional anti-poisoning capability.

Applied Catalysis B: EnvironmentalVol. 389
Institució Catalana de Recerca i Estudis Avançats (ES), Beijing Normal University (CN), Institut Català de Nanociència i Nanotecnologia (ES), Institut de Recerca en Energia de Catalunya (ES), Chongqing University of Technology (CN)
Industry, innovation and infrastructure
Openalex Percentile: Top 49%
Electrocatalysts for Energy Conversion
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.