Development and characterization of ScSZ-SDC composites electrolytes for intermediates temperature solid oxide fuel cells

Abstract The use of samarium-doped ceria (SDC) and scandia-stabilized zirconia (ScSZ) has attracted growing attention due to their high ionic conductivity and structural stability at intermediate operating temperatures. In this study, a series of ScSZ–SDC composite electrolytes was developed with the aim of identifying the composition that provides the best balance between structural compatibility, thermal expansion matching, and electrochemical performance for IT-SOFC applications. Three formulations containing 70:30, 80:20, and 90:10 wt ratios of ScSZ to SDC were prepared through wet ball milling, followed by calcination to encourage phase formation. The crystalline phases were examined using X-ray diffraction (XRD) to determine compatibility between the two oxide systems. Thermal expansion coefficient (TEC) measurements were performed to assess matching with IT-SOFC operating conditions. Morphological observations provided insight into the microstructural features of the powders. Electrochemical performance was evaluated using electrochemical impedance spectroscopy (EIS) at temperatures of 800 °C, 700 °C, and 600 °C. XRD analysis confirmed that all compositions crystallized into single-phase cubic fluorite structures, with no secondary phases detected after calcination, indicating good chemical compatibility between ScSZ and SDC. TEC measurements revealed that the 90 wt% ScSZ-10 wt% SDC sample exhibited the most favorable thermal expansion matching for IT-SOFC applications. Notably, this composition also delivered the lowest area-specific resistance, achieving an ASR value of 1.73 Ω cm 2 at 800 °C, and consistently showed the best electrochemical performance across all test temperatures. These findings demonstrate that careful compositional selection of ScSZ-SDC electrolytes is essential for achieving both structural stability and enhanced ionic transport in IT-SOFCs. Among the tested formulations, the 90:10 wt% ScSZ-SDC composition emerged as the most promising, offering an optimal combination of phase compatibility, thermal expansion behaviour, and electrochemical performance.

Authors

Institutions

Publication Details

Journal
Pure and Applied Chemistry
Published
2026-02-09
DOI
https://doi.org/10.1515/pac-2025-0613
Primary Topic
Advancements in Solid Oxide Fuel Cells
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Development and characterization of ScSZ-SDC composites electrolytes for intermediates temperature solid oxide fuel cells

Nurul Farhana Abdul Rahman, Wan Nor Anasuhah Wan Yusoff, Hamimah Abd. Rahman, Tan Kang Huai et al.
Pure and Applied Chemistry
Advancements in Solid Oxide Fuel Cells
article

Development and characterization of ScSZ-SDC composites electrolytes for intermediates temperature solid oxide fuel cells

Nurul Farhana Abdul Rahman, Wan Nor Anasuhah Wan Yusoff, Hamimah Abd. Rahman, Tan Kang Huai, Sheikh Ahmad Safwan
article en

Abstract

Abstract The use of samarium-doped ceria (SDC) and scandia-stabilized zirconia (ScSZ) has attracted growing attention due to their high ionic conductivity and structural stability at intermediate operating temperatures. In this study, a series of ScSZ–SDC composite electrolytes was developed with the aim of identifying the composition that provides the best balance between structural compatibility, thermal expansion matching, and electrochemical performance for IT-SOFC applications. Three formulations containing 70:30, 80:20, and 90:10 wt ratios of ScSZ to SDC were prepared through wet ball milling, followed by calcination to encourage phase formation. The crystalline phases were examined using X-ray diffraction (XRD) to determine compatibility between the two oxide systems. Thermal expansion coefficient (TEC) measurements were performed to assess matching with IT-SOFC operating conditions. Morphological observations provided insight into the microstructural features of the powders. Electrochemical performance was evaluated using electrochemical impedance spectroscopy (EIS) at temperatures of 800 °C, 700 °C, and 600 °C. XRD analysis confirmed that all compositions crystallized into single-phase cubic fluorite structures, with no secondary phases detected after calcination, indicating good chemical compatibility between ScSZ and SDC. TEC measurements revealed that the 90 wt% ScSZ-10 wt% SDC sample exhibited the most favorable thermal expansion matching for IT-SOFC applications. Notably, this composition also delivered the lowest area-specific resistance, achieving an ASR value of 1.73 Ω cm 2 at 800 °C, and consistently showed the best electrochemical performance across all test temperatures. These findings demonstrate that careful compositional selection of ScSZ-SDC electrolytes is essential for achieving both structural stability and enhanced ionic transport in IT-SOFCs. Among the tested formulations, the 90:10 wt% ScSZ-SDC composition emerged as the most promising, offering an optimal combination of phase compatibility, thermal expansion behaviour, and electrochemical performance.

Pure and Applied Chemistry
National University of Malaysia (MY), Tunku Abdul Rahman University of Management and Technology (MY), Tun Hussein Onn University of Malaysia (MY)
Openalex Percentile: Top 55%
Advancements in Solid Oxide Fuel Cells
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.