Flexural Behavior and Deformation Analysis of Top-Chord-Free Vierendeel-Truss Composite Slab with Square-Tube Bottom Chords

This study examines a top-chord-free open-web steel-truss composite floor in which the concrete slab functionally replaces the traditional top chord and works jointly with vertical square-tube web members and a square-tube bottom chord. Two scaled specimens—with and without concrete infill in the end shear-bending blocks—were fabricated and tested under static loading. The load–deflection response delineates three stages: elastic, elastic–plastic, and failure. Tests show that infilling the shear-bending blocks does not enhance global mechanical performance. In the elastic range, the mid-span open-web section satisfies the plane-section assumption with a linear strain profile, whereas the solid-web section exhibits a bilinear distribution. A validated ANSYS finite-element model reproduces the measured responses and supports a parametric study showing that span-to-depth ratio, opening-to-span ratio, slab (flange) thickness, and width-to-span ratio significantly affect ultimate capacity and deflection. Design recommendations are proposed: span-to-depth ratios of 11–14 and opening-to-span ratios of 0.04–0.07. An equivalent-stiffness-based simplified linear-elastic deflection formula with a reduction factor is derived, which accurately tracks deflection evolution and enables serviceability-driven selection of web spacing and overall structural depth.