Dynamic mathematical model of a non-dispersive infrared (NDIR) absorption spectroscopy measurement system for transient gas analysis
Non-dispersive infrared (NDIR) absorption spectroscopy is widely used for quantitative gas analysis; however, a steady-state interpretation of the Beer–Lambert law alone does not account for gas-transport-induced transient responses or temperature-dependent behavior encountered under practical flow conditions. Here, the effects of flow rate and cell temperature on transient NDIR responses are experimentally characterized, and a unified dynamic formulation is presented. The detection cell is modeled as a linear time-invariant system with a characteristic time constant \( \tau =V/v\) ( \( V\) : effective gas volume, \( v\) : volumetric flow rate), and, under isothermal operation, the cell concentration is expressed as the convolution of the inlet concentration profile with the gas-exchange impulse response and is subsequently related to infrared absorbance through the Beer–Lambert law. This representation accounts for response delays and waveform asymmetry under time-varying composition and flow, and it provides implementation-ready procedures for response correction and calibration in dynamic measurements. The formulation offers quantitative guidance on flow-rate and temperature effects beyond instrument-specific fixed settings and is expected to improve quantitative reliability for challenging sample matrices (e.g., powders, concrete, and liquids), thereby broadening NDIR applicability beyond conventional steel analysis.
Authors
- sangwoon Park (ORCID: https://orcid.org/0009-0008-2396-5813)
- Masahiko Inoue
Institutions
- Setsunan University (JP)
- Horiba (Japan) (JP)
Publication Details
- Journal
- Discover Applied Sciences
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1007/s42452-026-09668-w
- Primary Topic
- Spectroscopy and Laser Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00