Reclamation of mature Bambusa bambos (L.) Voss culms into activated carbon for adsorptive removal of Bisphenol A

This study deals with the sustainable conversion of mature Bambusa bambos culms into activated carbon (AC) for removal of Bisphenol A (BPA) from aqueous solutions, supporting the principles of the circular bioeconomy. AC was synthesized by chemical activation with orthophosphoric acid, with a BET surface area of 903.7 m 2 /g and average pore diameter 2.62 nm. SEM analysis of synthesized AC revealed an irregular rough porous surface, which became smoother with partial pore filling after BPA adsorption. The EDAX spectrum of BPA treated AC showed a slight decrease in carbon content (83.13 – 87.43%), while the oxygen content increased (10.01 – 15.65%), compared to untreated AC. FT-IR analysis indicated shifts in peaks corresponding to -O-H, -C=C and -C=O stretching vibrations, alcoholic or ether groups and C-H out of plane bending vibrations after BPA adsorption, indicating hydrogen bonding, dipole-dipole interactions and π-π stacking as dominant adsorption forces. Batch adsorption studies showed maximum adsorption efficiency (80.68%) at 20 mg/L BPA, 0.4 g/L AC dosage, pH 4.0, at 35 ºC, 125 RPM in 2 h. Adsorption followed pseudo second order kinetics (R 2 = 0.999) and Temkin isotherm (R 2 = 0.969), confirming strong adsorbent adsorbate interactions and a gradual decrease in adsorption heat. Thermodynamic analysis confirmed that adsorption is spontaneous and exothermic (ΔG°= -5.20 - -7.26 kJ/mol), driven by strong physisorption (ΔH° = –36.5 kJ/mol), with decreased randomness on the solid-solution interface (ΔS°= –98.6 J/mol). These results demonstrate that mature Bambusa bambos culms are a suitable precursor for conversion into AC for BPA remediation. • Bambusa bambos derived activated carbon – high surface area 903 m 2 /g and pore volume 0.7005 cm 3 /g • SEM, EDAX, FT-IR confirm strong physisorption of Bisphenol A • Maximum removal of 80.68% of 20 mg/L BPA, at 0/4 g/L BB-AC, pH 4.0, 35 ºC, 125 RPM in 2 h. • Reclamation of mature culms supports circular bioeconomy and wastewater treatment

Authors

Publication Details

Journal
Advances in Bamboo Science
Published
2026-02-01
DOI
https://doi.org/10.1016/j.bamboo.2026.100226
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Reclamation of mature Bambusa bambos (L.) Voss culms into activated carbon for adsorptive removal of Bisphenol A

Louella Concepta Goveas, K. Deeksha
Advances in Bamboo Science
Adsorption and biosorption for pollutant removal
article

Reclamation of mature Bambusa bambos (L.) Voss culms into activated carbon for adsorptive removal of Bisphenol A

Louella Concepta Goveas, K. Deeksha
article en

Abstract

This study deals with the sustainable conversion of mature Bambusa bambos culms into activated carbon (AC) for removal of Bisphenol A (BPA) from aqueous solutions, supporting the principles of the circular bioeconomy. AC was synthesized by chemical activation with orthophosphoric acid, with a BET surface area of 903.7 m 2 /g and average pore diameter 2.62 nm. SEM analysis of synthesized AC revealed an irregular rough porous surface, which became smoother with partial pore filling after BPA adsorption. The EDAX spectrum of BPA treated AC showed a slight decrease in carbon content (83.13 – 87.43%), while the oxygen content increased (10.01 – 15.65%), compared to untreated AC. FT-IR analysis indicated shifts in peaks corresponding to -O-H, -C=C and -C=O stretching vibrations, alcoholic or ether groups and C-H out of plane bending vibrations after BPA adsorption, indicating hydrogen bonding, dipole-dipole interactions and π-π stacking as dominant adsorption forces. Batch adsorption studies showed maximum adsorption efficiency (80.68%) at 20 mg/L BPA, 0.4 g/L AC dosage, pH 4.0, at 35 ºC, 125 RPM in 2 h. Adsorption followed pseudo second order kinetics (R 2 = 0.999) and Temkin isotherm (R 2 = 0.969), confirming strong adsorbent adsorbate interactions and a gradual decrease in adsorption heat. Thermodynamic analysis confirmed that adsorption is spontaneous and exothermic (ΔG°= -5.20 - -7.26 kJ/mol), driven by strong physisorption (ΔH° = –36.5 kJ/mol), with decreased randomness on the solid-solution interface (ΔS°= –98.6 J/mol). These results demonstrate that mature Bambusa bambos culms are a suitable precursor for conversion into AC for BPA remediation. • Bambusa bambos derived activated carbon – high surface area 903 m 2 /g and pore volume 0.7005 cm 3 /g • SEM, EDAX, FT-IR confirm strong physisorption of Bisphenol A • Maximum removal of 80.68% of 20 mg/L BPA, at 0/4 g/L BB-AC, pH 4.0, 35 ºC, 125 RPM in 2 h. • Reclamation of mature culms supports circular bioeconomy and wastewater treatment

Advances in Bamboo ScienceVol. 14
Responsible consumption and production
Openalex Percentile: Top 58%
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.