Mechanical Characterization of Sustainable Fiber-Reinforced Plasters for Non-Structural Wall Application

The seismic vulnerability of existing reinforced concrete buildings is often exacerbated by the inadequate mechanical performance of non-structural components, such as masonry infill walls, which may exhibit brittle behavior and limited deformation capacity under seismic actions. This issue highlights the need for innovative and compatible strengthening materials capable of improving ductility and damage tolerance while maintaining adequate mechanical strength. This study presents an experimental investigation aimed at developing a sustainable fiber-reinforced plaster manufactured exclusively from locally sourced natural materials from the Calabria region, including cork granules, broom fibers, and natural hydraulic lime. Following a preliminary experimental phase, the mixture containing 30% cork granules was selected as the reference matrix due to its favorable mechanical performance and deformability. In the present phase of the research, several composite formulations incorporating broom fibers were produced and experimentally characterized. Uniaxial tensile tests were conducted on broom fibers to assess their reinforcing potential, while compressive and flexural tests were performed on the plaster matrices. The experimental results show that the incorporation of broom fibers significantly enhances flexural behavior and post-cracking ductility, while maintaining compressive strength levels compatible with structural retrofit applications. The study demonstrates that the combined use of cork and broom fiber effectively enhances the mechanical performance of the plaster by promoting ductility, improving flexural behavior, and limiting crack initiation and propagation. The high tensile strength of the fibers promotes effective crack-bridging mechanisms and improved energy dissipation capacity. Overall, the combined use of cork aggregates and broom fibers results in a mechanically balanced plaster composite characterized by enhanced deformability and reduced brittleness. These features make the proposed material particularly suitable for the strengthening of masonry infill walls and for applications where improved ductility and damage tolerance are required, such as seismic retrofitting and restoration of existing buildings.