Graphene-Based Sensors and Biosensors Fabricated via Pulsed Laser Deposition for Chemical and Biological Threat Detection: A Comprehensive Roadmap

Graphene-based sensors and biosensors are attractive candidates for chemical and biological threat detection due to their high surface sensitivity, rapid transduction, and low-power operation, yet real-world deployment remains constrained by cross-sensitivity, interface instability in biosensing, and limited validation under operational conditions. This review consolidates key requirements for Chemical, Biological, Radiological, and Nuclear (CBRN) detection and proposes a structured roadmap to guide the transition from laboratory demonstrations to field-relevant sensing systems. The roadmap is explicitly modular and non-linear, integrating (i) qualitative research planning and gap analysis, (ii) computational screening via molecular docking as a hypothesis-generation tool with well-defined limitations, (iii) graphene electrode fabrication and functionalization using pulsed laser deposition (PLD) to enable tunable thickness/defect engineering and strong interface control, (iv) multiscale characterization combining laboratory methods with in situ/portable diagnostics, and (v) field-oriented performance evaluation focused on response time, stability, selectivity against industrial interferents, and false-positive/false-negative behavior. Iterative feedback loops connect all modules, enabling progressive refinement of material processing, recognition chemistry, and device architecture. By framing success in terms of technology-maturity progression and operational metrics, this roadmap provides a practical, defense-relevant framework for developing deployable graphene-based CBRN sensing platforms.