Encryption Using Cholesteric Liquid Crystal Epoxy Film with Regionally Tailored Cross-Linking

Vividly colored cholesteric liquid crystal polymer network (CLCN) patterns based on epoxy resin are used in decorative and anti-counterfeiting applications. These films are typically prepared via cationic photopolymerization and post-polymerization to achieve a high cross-linking degree. In this work, the cross-linking degree is controlled by varying the UV irradiation dosage during photopolymerization. Following this, the reflection band of the CLCN film changes after removing non-cross-linked compounds with acetone. Leveraging the low cationic polymerization rate and the chain termination capability of methanol, a structurally colored CLCN film with regionally tailored cross-linking was fabricated. With the treatment of acetone, a colorful pattern was observed. Moreover, upon immersion in methanol, the film swelled, revealing a colorful pattern. After the evaporation of methanol, the pattern disappeared. Consequently, this CLCN film holds significant potential for information encryption applications.