Effect of Accelerated Thermal Aging on the Dispersion Stability of Fine-Denier Silicone Emulsions for Carbon Fiber Precursor Processing

Fine-denier silicone emulsions play an important role in the polyacrylonitrile (PAN) precursor treatment process by reducing surface tension and preventing fiber fusion during thermal stabilization and carbonization. These emulsions are typically prepared by dispersing polydimethylsiloxane (PDMS) polymers with various functional groups into water through different emulsification methods. In this study, two types of silicone emulsions-one prepared using a mechanical disperser and the other using a high-shear colloid mill-were manufactured on a pilot scale and systematically compared. Thermal aging was conducted at 50 °C and 70 °C for approximately one month, and changes in particle size, dispersion stability, and physicochemical properties were evaluated. The colloid-mill emulsification method produced smaller and more uniform silicone particles and exhibited superior thermal and dispersion stability relative to the mechanically dispersed emulsion. NMR relaxation, Turbiscan multiple light scattering, and viscosity measurements confirmed that the colloid-mill emulsion maintained a stable microstructure with minimal aggregation even under elevated-temperature storage. These results demonstrate that high-shear emulsification is an effective approach for producing fine-denier silicone emulsions with enhanced stability, making the colloid-mill method a more reliable and practical route for preparing silicone-based oiling agents used during PAN precursor processing in carbon fiber manufacturing.