Effect of Electrolytic Solution on Corrosion Behavior and Mechanical Properties of a Coated AZ31 Magnesium Alloy Via Plasma Electrolytic Oxidation Process

The present work deals with the corrosion behavior and mechanical properties of a coted AZ31 magnesium alloy through plasma electrolyte oxidation (PEO) coating process in different alkaline electrolytes based on sodium silicate (Si-coating), sodium polyphosphate (P-coating) and sodium aluminate (Al-coating). The scanning electron microscopy (SEM) equipped with the energy dispersive x-ray spectroscopy (EDX) plus x-ray diffraction were recruited to investigate the morphology, chemical composition, and phase structure of coatings, respectively. Microscopic scrutiny revealed that the coating in the phosphate electrolyte was twice as thick and the relative porosity percentage was higher than those formed in the other electrolytes. The phase analysis indicated that the MgO was present as the prevailing phase in the Al-coating and P-coating. However, the dominant phase in the Si-coating was Mg2SiO4. Electrochemical testing was examined in a solution containing 3.5.wt% sodium chloride, showing improvements in corrosion resistance of coated alloys. These investigations confirmed that the corrosion resistance of Si-coating was dramatically higher than others which could be attributed to the presence of the dense and stable Mg2SiO4 phase as well as its relatively low porosity. According to the results of tensile tests, the coated samples had lower tensile strength and elongation than the uncoated one. The tensile strength and elongation diminished upon changing the electrolyte from Al-coating to P-coating, while the yield strength was almost similar. Further analyses indicated that the drop of tensile strength and elongation could be attributed to the presence of cracks and pores in the brittle ceramic PEO coating as stress concentration regions during deformation. Those areas are created due to thermal stress during the coating process and deformation in the elastic stage.

Authors

Institutions

Publication Details

Journal
SHILAP Revista de lepidopterología
Published
2025-12-01
Primary Topic
Magnesium Alloys: Properties and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Effect of Electrolytic Solution on Corrosion Behavior and Mechanical Properties of a Coated AZ31 Magnesium Alloy Via Plasma Electrolytic Oxidation Process

Saeed Reza Allahkaram, Majid Shamsarjmand, Mohammad H.Mohammad-Ebrahimi, Yasin Mehdizadeh
SHILAP Revista de lepidopterología
Magnesium Alloys: Properties and Applications
article

Effect of Electrolytic Solution on Corrosion Behavior and Mechanical Properties of a Coated AZ31 Magnesium Alloy Via Plasma Electrolytic Oxidation Process

Saeed Reza Allahkaram, Majid Shamsarjmand, Mohammad H.Mohammad-Ebrahimi, Yasin Mehdizadeh
article en

Abstract

The present work deals with the corrosion behavior and mechanical properties of a coted AZ31 magnesium alloy through plasma electrolyte oxidation (PEO) coating process in different alkaline electrolytes based on sodium silicate (Si-coating), sodium polyphosphate (P-coating) and sodium aluminate (Al-coating). The scanning electron microscopy (SEM) equipped with the energy dispersive x-ray spectroscopy (EDX) plus x-ray diffraction were recruited to investigate the morphology, chemical composition, and phase structure of coatings, respectively. Microscopic scrutiny revealed that the coating in the phosphate electrolyte was twice as thick and the relative porosity percentage was higher than those formed in the other electrolytes. The phase analysis indicated that the MgO was present as the prevailing phase in the Al-coating and P-coating. However, the dominant phase in the Si-coating was Mg2SiO4. Electrochemical testing was examined in a solution containing 3.5.wt% sodium chloride, showing improvements in corrosion resistance of coated alloys. These investigations confirmed that the corrosion resistance of Si-coating was dramatically higher than others which could be attributed to the presence of the dense and stable Mg2SiO4 phase as well as its relatively low porosity. According to the results of tensile tests, the coated samples had lower tensile strength and elongation than the uncoated one. The tensile strength and elongation diminished upon changing the electrolyte from Al-coating to P-coating, while the yield strength was almost similar. Further analyses indicated that the drop of tensile strength and elongation could be attributed to the presence of cracks and pores in the brittle ceramic PEO coating as stress concentration regions during deformation. Those areas are created due to thermal stress during the coating process and deformation in the elastic stage.

SHILAP Revista de lepidopterología
Sharif University of Technology (IR), University of Tehran (IR)
Openalex Percentile: Top 39%
Magnesium Alloys: Properties and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.