Effect of minor gallium additions on liquid-phase sintering and optimization of post-sintering heat treatment of Nd2Fe14B-based magnets probed by DSC method

The effect of minor gallium additions (0, 0.5, and 1 wt. %) on the liquid-phase sintering process, microstructure, and magnetic properties has been investigated for isotropic samples sintered in situ in a thermal analyzer and anisotropic permanent magnets based on the (Nd,Pr)–(Fe,Co,Ga,Cu,Al)–B system. Using in situ differential scanning calorimetry and thermogravimetric analysis, it is established that the introduction of gallium significantly modifies the liquid-phase sintering process: the temperature range of melting of low-melting phases narrows, and the thermal effect is reduced. A substantial influence of gallium on the optimal regimes of the subsequent two-step heat treatment has been discovered: with an increase in its content to 1 wt. %, the temperature of the high-temperature annealing T1 decreases by 90 °C (from 910 to 820 °C) and that of the low-temperature annealing T2 by 60 °C (from 540 to 480 °C). For anisotropic magnets, doping with 0.5 wt. % Ga leads to the optimization of the grain-boundary microstructure and a significant increase in the coercivity (HcJ up to 17.1 kOe) and maximum energy product [(BH)max up to 44.6 MG Oe].

Authors

Institutions

Publication Details

Journal
Journal of Applied Physics
Published
2026-11-19
DOI
https://doi.org/10.1063/5.0348300
Primary Topic
Magnetic Properties of Alloys
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of minor gallium additions on liquid-phase sintering and optimization of post-sintering heat treatment of Nd2Fe14B-based magnets probed by DSC method

Elena B. Marchenkova, O.A. Golovnia, Л. А. Сташкова, Д. А. Колодкин et al.
Journal of Applied Physics
Magnetic Properties of Alloys
article

Effect of minor gallium additions on liquid-phase sintering and optimization of post-sintering heat treatment of Nd2Fe14B-based magnets probed by DSC method

Elena B. Marchenkova, O.A. Golovnia, Л. А. Сташкова, Д. А. Колодкин, А. В. Шитов, Vasilii Gaviko, А. Р. Солтус, Daniel Vasilenko
article en

Abstract

The effect of minor gallium additions (0, 0.5, and 1 wt. %) on the liquid-phase sintering process, microstructure, and magnetic properties has been investigated for isotropic samples sintered in situ in a thermal analyzer and anisotropic permanent magnets based on the (Nd,Pr)–(Fe,Co,Ga,Cu,Al)–B system. Using in situ differential scanning calorimetry and thermogravimetric analysis, it is established that the introduction of gallium significantly modifies the liquid-phase sintering process: the temperature range of melting of low-melting phases narrows, and the thermal effect is reduced. A substantial influence of gallium on the optimal regimes of the subsequent two-step heat treatment has been discovered: with an increase in its content to 1 wt. %, the temperature of the high-temperature annealing T1 decreases by 90 °C (from 910 to 820 °C) and that of the low-temperature annealing T2 by 60 °C (from 540 to 480 °C). For anisotropic magnets, doping with 0.5 wt. % Ga leads to the optimization of the grain-boundary microstructure and a significant increase in the coercivity (HcJ up to 17.1 kOe) and maximum energy product [(BH)max up to 44.6 MG Oe].

Journal of Applied PhysicsVol. 140(19)
Ural Federal University (RU)
Magnetic Properties of Alloys
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon