Irradiation Driven Restructuring of Nanocrystalline ThO ₂ and Th _{1– <i>x</i>} U _<i>x</i> O ₂ Thin Films

Irradiation induced structural changes of actinide oxide materials is a key consideration in their development and use as nuclear fuels. This study reported on the synthesis of ThO₂ and Th_1-<i>x</i>U_<i>x</i>O₂ (<i>x</i> = 0.15, 0.50) thin films, fabricated using electrospray-assisted solution combustion synthesis, and their responses to ion irradiation. Krypton ion irradiations, up to a fluence of 1 × 10¹⁶ ions/cm², were carried out to simulate radiation damage induced by fission products in a reactor environment. Structural and chemical changes induced by irradiation were analyzed using high-resolution scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDS), and electron energy-loss spectroscopy (EELS). It was determined that the extent and nature of irradiation-induced damage are strongly correlated with the uranium content. ThO₂ films were most susceptible to radiation-induced damage, with significant cavity formation and delamination from the substrate at high fluence. Of the compositions studied, Th_0.85U_0.15O₂ films showed the highest stability, characterized by moderate grain growth and the absence of voids or severe defect structures. In contrast, Th_0.5U_0.5O₂ films accumulated extensive damage, including the formation of a nanocrystalline central region. EELS analysis indicated that oxygen displacement is the primary driver of structural degradation in Th_0.5U_0.5O₂ films. α-particle spectroscopy confirmed minimal actinide loss across all compositions, underscoring the mechanical robustness of the films. These findings provide insight into the irradiation-induced damage mechanisms in ThO₂ and Th_1-<i>x</i>U_<i>x</i>O₂ systems, supporting their development as potential materials for nuclear fuels and irradiation-tolerant thin film targets in nuclear physics measurements.