Evaluating the Applicability of the wflow_sbm Model with Seamless Parameter Maps for Flood Simulation in Small- and Medium-Sized Catchments

Flood simulation in small- and medium-sized catchments is hindered by data scarcity and strong hydroclimatic heterogeneity. Distributed models with pedotransfer functions offer new opportunities, yet their parameter sensitivity and regional applicability remain insufficiently understood. In this study, the wflow_sbm model was applied to two catchments: the humid Tunxi basin and the semi-humid Chenhe basin, China. Model seamless parameters, defined as spatially continuous fields derived directly from global datasets using pedotransfer functions without local calibration, were generated using the HydroMT system. The parameter sensitivity, applicability of pedotransfer function derived parameters, and model performance were systematically evaluated and benchmarked against the well-established Xin’anjiang (XAJ) model, which is a conceptual lumped hydrological model widely used for flood simulation in humid and semi-humid regions of China. Sensitivity analysis identified KsatHorFrac and InfiltCapSoil as dominant in Tunxi, and KsatHorFrac and SoilThickness in Chenhe. SoilThickness derived by HydroMT underestimated flood volumes in the Chenhe basin but was substantially improved after applying a uniform scaling factor of 0.1, resulting in an effective SoilThickness of approximately 0.2 m. The wflow_sbm model achieved performance comparable to the XAJ model. Optimal calibration achieved NSE = 0.85 in Tunxi with good performance at internal sub-catchments (Yuetan and Chengcun, NSE > 0.70), and generally above 0.7 in Chenhe. These findings highlight the region-dependent validity of parameterization and provide guidance for distributed flood modeling in data-scarce basins.