Influence of Isopropanol on Kinetics of Hydrogen Evolution Reaction Examined at Nickel Foam Electrodes in Alkaline Solution

The current work examines the impact of isopropanol (IPA) on the electrochemical characteristics of nickel foam and Pd-modified Ni foam electrodes in a 0.1 M NaOH medium, with respect to the kinetics of the hydrogen evolution reaction (HER) over the temperature range of 20–40 °C. Comparative HER/IPA examinations are presented for a highly catalytic polycrystalline Pt electrode. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and cathodic Tafel polarization experiments were carried out in this work, where the IPA concentrations ranged from 1.0 × 10−5 to 1.0 × 10−3 M. The introduction of small amounts of isopropyl alcohol into the working electrolyte noticeably facilitated the catalytic efficiency of the hydrogen evolution reaction on the surface of Ni foam electrodes. This is most likely related to the fact that IPA molecules undergo partial electrooxidation to acetone (qualitatively confirmed by GC-MS analysis) during initial CV cycling, which is believed to significantly diminish the surface tension phenomenon during the HER, thus promoting hydrogen bubble separation from the electrode surface. It should also be noted that acetone will continuously be produced at the Pt anode, making it essential to consider further migration of (CH3)2CO molecules to the working cell compartment. Most importantly, isopropanol was found not to undergo significant surface electrosorption on the nickel foam-based catalysts, which could otherwise significantly inhibit the hydrogen evolution reaction On the contrary, the presence of IPA in the electrolyte solution seems to have a detrimental effect on the kinetics of both the HER and the UPDH (underpotential deposition of H) processes on the surface of the polycrystalline Pt electrode, which is a superior electrochemical catalyst for HER, but highly susceptible to surface contamination.