Performance of a High-Molecular-Weight AM/AA Copolymer in a CO2–Water Polymer Hybrid Fracturing Fluid Under High-Temperature and High-Pressure Conditions

To reduce water consumption and potential formation damage associated with conventional water-based fracturing fluids while improving the proppant-carrying and flow adaptability of CO₂-based systems without relying on specialized CO₂ thickeners, a CO₂-water polymer hybrid fracturing fluid was developed using an AM/AA copolymer (poly(acrylamide-co-acrylic acid), P(AM-co-AA)) as the thickening agent for the aqueous phase. Systematic experimental investigations were conducted under high-temperature and high-pressure conditions. Fluid-loss tests at different CO₂ volume fractions show that the CO₂-water polymer hybrid fracturing fluid system achieves a favorable balance between low fluid loss and structural continuity within the range of 30-50% CO₂, with the most stable fluid-loss behavior observed at 40% CO₂. Based on this ratio window, static proppant-carrying experiments indicate controllable settling behavior over a temperature range of 20-80 °C, leading to the selection of 60% polymer-based aqueous phase + 40% CO₂ as the optimal mixing ratio. Rheological results demonstrate pronounced shear-thinning behavior across a wide thermo-pressure range, with viscosity decreasing systematically with increasing shear rate and temperature while maintaining continuous and reproducible flow responses. Pipe-flow tests further reveal that flow resistance decreases monotonically with increasing flow velocity and temperature, indicating stable transport characteristics. Phase visualization observations show that the CO₂-water polymer hybrid fracturing fluid system exhibits a uniform milky dispersed appearance under moderate temperature or elevated pressure, whereas bubble-dominated structures and spatial phase separation gradually emerge under high-temperature and relatively low-pressure static conditions, highlighting the sensitivity of phase stability to thermo-pressure conditions. True triaxial hydraulic fracturing experiments confirm that the CO₂-water polymer hybrid fracturing fluid enables stable fracture initiation and sustained propagation under complex stress conditions. Overall, the results demonstrate that the AM/AA copolymer-based aqueous phase can provide effective viscosity support, proppant-carrying capacity, and flow adaptability for CO₂-water polymer hybrid fracturing fluid over a wide thermo-pressure range, confirming the feasibility of this approach without the use of specialized CO₂ thickeners.