Measured small-scale properties in turbulent Rayleigh–Bénard convection with polymer additives

We report an experimental study on the effects of polymer additives in the dissipative-scale flow field properties in turbulent Rayleigh–Bénard convection. The experiments were conducted in a cylindrical convection cell with a minute amount of polyacrylamide long-chain polymer. The local velocity gradient tensor was measured using an integrated home-made measurement system ( J. Fluid Mech. , 2024, vol. 984, p. A8). Although the single-roll large-scale circulation persists (owing to the slight tilt of the convection cell), polymers induce an anisotropic suppression of the dissipative-scale flow properties. The normal velocity gradient components are suppressed more than the shear components. The mean energy dissipation rate in both centre and side regions decreases, then levels off with increasing polymer concentration and the final reduction ratio exceeds 50 % in each region. In the side region, adding polymers has a stronger stabilising effect on the strain rate than the rotation. The anisotropic suppression of the velocity gradient tensor affects dissipation-rotation co-occurrence probability, velocity gradient triple decomposition and local streamline topology. Adding polymers also induces a deceleration effect and increases the contribution of local buoyancy in driving the flow. These results reveal that the addition of polymers can non-trivially manipulate dissipative-scale turbulence fields and energy cascades.