Microplastic pollution and polymer-specific hazards in different water sources of Thimphu, Bhutan

Microplastics (MPs) are an emerging contaminant of concern due to their persistence, polymer-specific toxicity, and potential human exposure through drinking water. This study provides the first systematic assessment of MPs in diverse water sources in Thimphu, Bhutan (n=54), including streams, rivers, groundwaters, municipal taps, and bottled waters. Samples were analysed using pyrolysis–GC/MS and evaluated through Polymer Risk Index (PRI) and Estimated Daily Intake (EDI). MPs concentrations varied widely, with streams (5.12 ± 0.70 µg/L) and groundwaters (2.70 ± 0.32 µg/L) showing the highest levels, followed by rivers (2.69 ± 0.26 µg/L). Treated waters, including municipal taps (1.05 ± 0.18 µg/L) and bottled waters (0.78 ± 0.10 µg/L) had comparatively lower concentrations. PET (52.5%) was the dominant polymer, followed by PVC (14.6%) and SBR (14.3%), with upstream-to-downstream increases linked to urban pressures. While all sources showed overall moderate MPs concentrations, PRI classified every source as “high hazard” due to toxic polymers such as PVC and SBR. EDI values were highest in streams (0.17 ± 0.02 µg/kg/day) and lowest in bottled water (0.02 ± 0.00 µg/kg/day), comparable to intermediate global estimates. Although concentrations were moderate, the predominance of hazardous polymers and chronic low-dose exposure highlight potential ecological and health risks. The presence of MPs in municipal tap and bottled water shows treatment and packaging does not fully eliminate contamination, highlighting the need for strengthening catchment protection, management, and long-term monitoring. Polymer-specific toxicological studies are crucial for risk-based policy under rapidly urbanizing and climate-sensitive context. • Raw water (stream, river and groundwater) had slightly higher MPs than treated water. • PET, PVC, and SBR were dominant polymers with clear downstream accumulation. • Pollution Load Index showed low risk, but Polymer Risk Index indicated high hazard. • Estimated Daily Intake revealed variable human exposure from different sources. • Findings call for catchment protection, waste management, and improved treatment.

Authors

Institutions

Publication Details

Journal
Journal of Hazardous Materials Plastics
Published
2026-02-01
DOI
https://doi.org/10.1016/j.hazmp.2026.100044
Primary Topic
Microplastics and Plastic Pollution
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Microplastic pollution and polymer-specific hazards in different water sources of Thimphu, Bhutan

Amin Ngawang Tashi, Pema Chophel, Rinzin Wangdi, Chimmi Dorji et al.
Journal of Hazardous Materials Plastics
Microplastics and Plastic Pollution
article

Microplastic pollution and polymer-specific hazards in different water sources of Thimphu, Bhutan

Amin Ngawang Tashi, Pema Chophel, Rinzin Wangdi, Chimmi Dorji, Phub Zam
article en

Abstract

Microplastics (MPs) are an emerging contaminant of concern due to their persistence, polymer-specific toxicity, and potential human exposure through drinking water. This study provides the first systematic assessment of MPs in diverse water sources in Thimphu, Bhutan (n=54), including streams, rivers, groundwaters, municipal taps, and bottled waters. Samples were analysed using pyrolysis–GC/MS and evaluated through Polymer Risk Index (PRI) and Estimated Daily Intake (EDI). MPs concentrations varied widely, with streams (5.12 ± 0.70 µg/L) and groundwaters (2.70 ± 0.32 µg/L) showing the highest levels, followed by rivers (2.69 ± 0.26 µg/L). Treated waters, including municipal taps (1.05 ± 0.18 µg/L) and bottled waters (0.78 ± 0.10 µg/L) had comparatively lower concentrations. PET (52.5%) was the dominant polymer, followed by PVC (14.6%) and SBR (14.3%), with upstream-to-downstream increases linked to urban pressures. While all sources showed overall moderate MPs concentrations, PRI classified every source as “high hazard” due to toxic polymers such as PVC and SBR. EDI values were highest in streams (0.17 ± 0.02 µg/kg/day) and lowest in bottled water (0.02 ± 0.00 µg/kg/day), comparable to intermediate global estimates. Although concentrations were moderate, the predominance of hazardous polymers and chronic low-dose exposure highlight potential ecological and health risks. The presence of MPs in municipal tap and bottled water shows treatment and packaging does not fully eliminate contamination, highlighting the need for strengthening catchment protection, management, and long-term monitoring. Polymer-specific toxicological studies are crucial for risk-based policy under rapidly urbanizing and climate-sensitive context. • Raw water (stream, river and groundwater) had slightly higher MPs than treated water. • PET, PVC, and SBR were dominant polymers with clear downstream accumulation. • Pollution Load Index showed low risk, but Polymer Risk Index indicated high hazard. • Estimated Daily Intake revealed variable human exposure from different sources. • Findings call for catchment protection, waste management, and improved treatment.

Journal of Hazardous Materials PlasticsVol. 2
Royal Centre for Disease Control (BT)
Sustainable cities and communities
Openalex Percentile: Top 69%
Microplastics and Plastic Pollution
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.